Sign in

Port Aligner DN40CF

Product code: PA40W

Edge welded bellows port aligner with pivot mounts
Three left/right threaded hexnuts allow for angular as well as linear adjustment. The alignment screws are equipped with pivot mounts on one end and are bolted to the CF-Flange on the other end. Both flanges are DN40CF with through holes.

This simple device is particularly useful for the angular alignment of RM and GMD sample transporters.


Specifications: Port Aligner DN40CF

adds -90.0mm to retracted length

  • Edge welded bellows port aligner with pivot mounts
  • Flange 1: DN40CF through hole
  • Flange 2: DN40CF through hole
  • Insertion length: 90mm +/-5mm
  • Angular range: +/-5°
  • Free inner bore: 38mm (when centered)
  • Fully UHV compatible materials
  • Maximum bakeout temperature: 200°C

download dimensional drawing

Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2017 | © vogy GmbH 2017