Sign in

SPECIAL OFFER Hexapod Port Aligner DN63CF, both flanges tapped M8

Product code: PA63HEX(T2)_SPECIAL_OFFER

Special Offer 33% discount

Hexapod geometry for full degree of freedom:

  • lateral axis displacement
  • length adjustment
  • angular adjustment

This port aligner has six alignment screws instead of the usual three. Left/right threaded hexnuts allow for angular, linear and lateral (off axis) adjustment. The alignment screws are equipped with pivot mounts on both ends. The hexagonal geometry adds additional sturdyness.

Application example: A sample transporter axis needs to be aligned to two points of sample interchange, i.e. a given point of interchange in a chamber A must be aligned with a specific point of interchange in chamber B.

 


Specifications: SPECIAL OFFER Hexapod Port Aligner DN63CF, both flanges tapped M8

HexaPort aligner DN63CF

  • flange 1: DN63CF, tapped M8
  • flange 2: DN63CF, tapped M8
  • insertion length: 90mm
  • lateral range: +/-5mm
  • angular range: +/-5deg
  • free bore: 65mm
  • pressure range 1E-11mbar to 1000mbar
  • fully UHV compatible materials
  • max. bakeout temperature 200°C


download drawing
download alignment manual

 

Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2017 | © vogy GmbH 2017