Sign in

Motorized linear and rotary drive for sample transporter

Product code: DRVRMOTLR-XXXX

The DRVRMOTLR is a stepper motor-driven linear and rotary actuator. It's high precision motorized spindle drive coupled to the outer magnet controls linear motion. A second stepper motor mounted onto the sledge of the linear unit controls rotation of the shaft for convenient manipulation of your sample. The sturdy linear unit ensures unchanging alignment of all components and consistent positioning.

Both our RM and GMD sample transporters can be equipped with the DRVRMOTLR option.
For retrofitment to your sample transporter, please contact us.

Please note that for bakeout the drive must be removed.

Specifications: Motorized linear and rotary drive for sample transporter

outer dimension X >= 0mm AND <= 1464mm; standard 0mm

Linear Unit:

  • accuracy: ± 0,1mm / 300mm
  • toothed belt transmission for linear drive : 1:1
  • linear unit has one adjustable (frontside) and one fixed limit switch (rear end, 0mm)

Rotary Unit:

  • max. rot speed: 60°/s
  • min. step size: (1.8°/64)/100 ~ 0.0003°
  • worm gear transmission: 1:100
  • rotary unit has two adjustable limit switches (0°-360°)

Downloads: drawing (pdf)  /  wiring diagram (pdf)  /  manual (pdf)

3D-model available on request

Stepper Motor Linear Drive:

  • Voltage: max 48 VDC
  • Amps/Phase: 2.0
  • Resistance/Phase: 8.8+/-10% Ohms
  • Holding torque: 1.32 Nm
  • Step angle: 1.8°+/-5%

datasheet (pdf)

Stepper Motor Rotary Drives:

  • Voltage: max. 48 VDC
  • Amps/Phase: 1.2
  • Resistance/Phase: 3.4+/-15% Ohms
  • Holding torque: 0.23 Nm (without worm gear unit)
  • Step angle: 1.8°+/-5%

datasheet (pdf)

  • controller not incl.

Spindle

  • linear drive spindle pitch: 3mm

Compatibility

The DRVRMOTLR-XXXX Motorized linear and rotary drive for sample transporter suits the following products:

List price:

4'280.00 CHF

4'440.94 EUR*
4'750.01 USD*

Single Shaft Sample Transporter DN40CF

Product code: RM40-XXXX-YYYY

Magnetically driven single shaft sample transporter with mounting flange DN40CF. Built with superior slide bearing technology for long-lifetime and smooth operation.

 


List price:

7'039.47 CHF

7'304.17 EUR*
7'812.52 USD*

Dual Shaft Single Rotary Sample Transporter

Product code: RMD40-XXXX-YYYY

Vacuum-side-all-metal magnetically driven dual shaft sample transporter with independent rotary motion of the inner shaft. Sapphire hybride ball bearings for extra durability and smooth operation are guiding a tubular outer shaft with a square crossection as well as the inner shaft. Recommended for travel ranges >750mm and for heavier loads.


List price:

on request

Hollow Shaft Sample Transporter DN40CF

Product code: RMHS40-XXXX-YYYY

Hollow shaft sample transporter with mounting flange DN40CF. Built with superior slide bearing technology for long-lifetime and smooth operation. Hollow Shaft sample tranporters are recommended for extra long travel ranges up to 2300mm


List price:

5'271.16 CHF

5'469.37 EUR*
5'850.02 USD*

Dual Shaft Single Rotary Sample Transporter

Product code: RMJ40-XXXX-YYYY

Extra sturdy magnetically driven dual shaft sample transporter with independent rotary motion of the inner shaft. Slide bearings for extra durability and smooth operation are guiding a tubular outer shaft with a square crossection. Sapphire hybride bearings are guiding the inner shaft. Recommended for travel ranges >750mm and for heavier loads.


Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2023 | © vogy GmbH 2023