869.26 EUR *
981.91 USD *
Prices listed are EXW Zurich (Incoterms 2010), excl. packing.
This price list replaces all previously published lists.
Prices are subject to change without notice.
Minimum order value: 150.00 CHF.
Pricing is in CHF.
Prices marked with an asterisk (*) in EUR & USD are for reference only.
Exchange rates:
1.1366 EUR/CHF
1.0062 USD/CHF
Tool for grabbing and handling SHOM flag style sample plates, using either a single shaft linear/rotary feedthrough or GMD40/RM40 sample transporter.
Mounted to a regular single shaft linear/rotary feedthrough or GMD40/RM40 sample transporter, the GRABSHOM can be used to manipulate SHOM flag style sample plates. It has a matching slit to slide over the sample plate's handle. By twisting the GRABSHOM 90 degrees either way, the sample plate will click into place and is held there gently by a sprung element. After depositing the sample plate, the GRABSHOM is again twisted 90 degrees and the sample plate can be released.
Contrary to similar other grabbers, the GRABSHOM doesn't have a fixed limit stop that could result in bending and eventually snapping off the sample plate's handle if rotated in the wrong direction. Rather, it offers continuous rotation while the sample plate is inserted.
adds 20.0 to dimension Y of the main product
The following is a list of compatible options for GRABSHOM Grabber Tool ID 8mm for SHOM Plates.
Commonly used flag style holder SHOM3S with 3 slots for receiver RECOM3S, available in a variety of materials and customized versions.
SHOM3S(ST) - SHOM3S(CU) - SHOM3S(CUBE) - SHOM3S(TI) - SHOM3S(MO) - SHOM3S(TA) - SHOM3S(SH) - SHOM3S(W) - SHOM3S(SiC)
1'342.60 EUR*
1'516.60 USD*
Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. Compatible with standard sample transfer systems for flag style holders. Requires RECOMEC13 sample receptor assembly.
Materials: Molybdenum, Beryllium-Copper, Stainless Steel. Isolators: shapal M - REV 23.05.2014 UM
1'747.32 EUR*
1'973.76 USD*
Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. With pre-installed lake shore DT-670 silicone diode temperature sensor. Requires RECOMEC13(LT) sample receptor assembly.
Material: Molybdenum, Shapal M - REV 23.05.2014 UM
162.77 EUR*
183.86 USD*
Flag style sample plate, three threads M1.4, incl. cheesehead screws and leaf springs
Material: stainless steel 1.4301 (AISI 304L)
REV 11.04.2014 UM
Example of a flag style sample holder for type K005 single crystals. For other single crystal types, please contact us.
1'127.05 EUR*
1'273.11 USD*
Sample holder featuring two mounting platforms for a semiconductor bar. The two contact rails are electrically isolated by Al2O3 washers.
Requires RECOMDC sample receiver with two high current electrical contacts.
1'142.00 EUR*
1'290.00 USD*
Sample holder featuring two mounting platforms for a semiconductor bar. One of the two contact rails is grounded with metallic (Mo) spacers.
Requires RECOMDC sample receiver with two high current electrical contacts.
Compatible with SHBS block style as well as SHOM systems. Materials: Molybdenum, CuBe, Titanium. This particular model has a central gap for applying magnetic field using a horseshoe magnet.
The GRABSHOM Grabber Tool ID 8mm for SHOM Plates suits the following products:
3'506.07 EUR*
3'960.45 USD*
Magnetically driven sample transporter with mounting flange DN40CF. Linear- and rotary motion.
REV: 24.06.2014 UM
1'605.67 EUR*
1'813.75 USD*
XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 15mm)
REV 02.11.2016 JB
1'341.72 EUR*
1'515.60 USD*
Magnetically driven linear/rotary feedthrough with mounting flange DN16CF. Linear travel: 100mm, continuous rotation. Typical lead time: 1-2 weeks. REV 22.09.2014 JK.
1'385.71 EUR*
1'565.30 USD*
Magnetically driven linear/rotary feedthrough with mounting flange DN16CF. Linear travel: 200mm, continuous rotation. Typical lead time: 1-2 weeks. REV 22.09.2014 JK.
1'429.70 EUR*
1'614.99 USD*
Magnetically driven linear/rotary feedthrough with mounting flange DN16CF. Linear travel: 300mm, continuous rotation. Typical lead time: 1-2 weeks. REV 22.09.2014 JK.
1'473.69 EUR*
1'664.68 USD*
Magnetically driven linear/rotary feedthrough with mounting flange DN16CF. Linear travel: 400mm, continuous rotation. Typical lead time: 1-2 weeks. REV 22.09.2014 JK.
1'777.23 EUR*
2'007.55 USD*
Magnetically driven single shaft linear/rotary feedthrough with mounting flange DN40CF.
XXXX: linear travel in millimeters (min 50mm, max 500mm)
YYYY: retracted length, flange face to end of shaft in millimeters (min 11.8mm, max 200mm), REV 22.09.2014 JK
3'343.30 EUR*
3'776.59 USD*
Magnetically driven single shaft sample transporter with mounting flange DN40CF. Re-engineered with superior slide bearing technology for long-lifetime and smooth operation.
2'991.38 EUR*
3'379.05 USD*
Magnetically driven single shaft sample transporter with mounting flange DN40CF. Re-engineered with superior slide bearing technology for long-lifetime and smooth operation.
Magnetically driven, single hollow shaft sample transporter with mounting flange DN40CF.
Straight flag style holder SHOS, available in a variety of materials and customized versions.