Sign in

Gripper for Flag Style Plates - for Single Shaft Wobblesticks

Product code: GRABSHOM7

The grabber features a slit matching the sample plate's handle. By rotating the wobblestick handle 90 degrees either way, the sample plate clicks into place and is held there gently by a spring loaded piston.
Contrary to similar grabbers from other manufacturers, the GRABSHOM does not have a fixed limit stop. It is thus not possible to overturn and eventually break-off the relatively delicate handle of the flag style plate. Neither can the user turn in the wrong direction, since both directions either lock or release the sample plate in quarter turn steps.

Specifications: Gripper for Flag Style Plates - for Single Shaft Wobblesticks

adds 20.0mm to dimension Y of the main product

  • for use with WM40 single shaft wobblesticks
  • continuous rotation for safe handling
  • bakeout temperature: 200 °C max.
  • materials: stainless steel, titanium, copper

Downloads:  drawing (pdf)  /  3D model (stp)

Options and Accessories

List price:

Flag style sample plate

Product code: SHOM

Commonly used flag style plates, available in a variety of materials and customized versions.

See Sample Holders for the full range of related products.

SHOM(ST) - SHOM(CU) - SHOM(CB) - SHOM(TI) - SHOM(MO) - SHOM(TA) - SHOM(AL2O3) - SHOM(SH) - SHOM(W) - SHOM(INCONEL)


List price:

186.97 CHF

201.50 EUR*
213.85 USD*

Flag Style Sample Plate, 5xM1.4 / molybdenum

Product code: SHOMT(MO)

Commonly used flag style sample holder with 5x M1.4 screw holes.


List price:

see pricelist below

Example Assembly - Flag-Style Sample Plate Configuration with 5xM1.4 Threads and Leaf Springs

Product code: SHOM4T(MO)

This example assembly combines a commonly used flag-style sample holder with 5x M1.4 threads, leaf springs, and screws. These products facilitate various options for securing samples onto the flag-style sample plate.


List price:

on request

Flag style sample plate with 3 slits

Product code: SHOM3S

The SHOM3S flag-style holder is designed with three slots that integrate perfectly with the RECOM3S drawer-style receptacle. These slots ensure precise and consistently reproducible positioning, supported by the receptacle's optimized three-point contact system. Available in various materials and customizable options to meet specific requirements.

SHOM3S(ST) - SHOM3S(CU) - SHOM3S(CUBE) - SHOM3S(TI) - SHOM3S(MO) - SHOM3S(TA) - SHOM3S(SH) - SHOM3S(W) - SHOM3S(SiC)


List price:

Straight through flag style sample plate

Product code: SHOS

Flag style sample plate, straight through model: available in a variety of materials
SHOS(ST) - SHOS(CU) - SHOS(CB) - SHOS(TI) - SHOS(MO) - SHOS(TA) - SHOS(AL2O3) - SHOS(SH) - SHOS(W) - SHOS(SiC)


List price:

on request

Flag Style Holder for Hat Shaped Single Crystals

Product code: SHOMTCH(MO)0008-0001-0007

For hat shaped single crystals such as the MaTeck K005 with OD=8mm, lip thickness 1mm, sample diameter <7mm


List price:

731.37 CHF

788.22 EUR*
836.50 USD*

Flag Style Holder for Hat Shaped Single Crystals

Product code: SHOMTCH(MO)-0010-0001-0009

For hat shaped single crystals such as the MaTeck K005 with OD=10mm, lip thickness 1mm, sample diameter <9mm


List price:

658.89 CHF

710.11 EUR*
753.60 USD*

Flag Style Sample Plate for Rectangular Single Crystals

Product code: SHOMTCHR(MO)-0007-0007-0001

For stepped square single crystals such as the MaTeck K102 with outline dimensions 7x7mm, lip thickness 1mm, sample size <6x6mm


List price:

1'718.76 CHF

1'852.37 EUR*
1'965.82 USD*

Sample Holder out of Molybdenum with 13 Electrical Contacts

Product code: SHOMEC13(MO)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. Compatible with standard sample transfer systems for flag style holders. This product requires a RECOMEC13 sample receptor assembly.

Materials: Molybdenum, Beryllium-Copper, Stainless Steel. Isolators: shapal M


List price:

2'507.18 CHF

2'702.08 EUR*
2'867.58 USD*

Sample Holder 13 Electrical Contacts Molybdenum including temperature sensor

Product code: SHOMEC13(MO-DT)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. With pre-installed lake shore DT-670 silicone diode temperature sensor.


List price:

1'574.59 CHF

1'696.99 EUR*
1'800.93 USD*

Sample Plate for Direct Current Heating with Grounding Contact

Product code: SHOMDC(N)

Sample holder featuring two mounting platforms for a semiconductor bar. One of the two contact rails is grounded with metallic (Mo) spacers.

Requires RECOMDC sample receiver with two high current electrical contacts.


Compatibility

The GRABSHOM7 Gripper for Flag Style Plates - for Single Shaft Wobblesticks suits the following products:

List price:

50'450.00 CHF

54'371.84 EUR*
57'701.99 USD*

NexGeneration UHV Suitcase Package for Room-Temperature Transfer

Product code: VSN40S(VRV)

This common configuration of the NexGeneration UHV features a WM40 single-shaft wobblestick and a grabber tool for SHOM sample plates, Atom Probe Pucks or dove-tail cryo-shuttles for sample transfer. Other sample systems are available on request.
The additional MD40(Y0) single shaft linear/rotary feedthrough holds a customizable stack of sample receivers and the rear-view welded window offers an essential additional view of the transfer point, exactly where you need it.

NiMH-Battery Powered High-Voltage Controller -  UN 3496 Not Restricted, as per Special Provision A199

Extended length from gate valve flange = ~335mm (varies slightly depending on sample system)


List price:

54'950.00 CHF

59'221.66 EUR*
62'848.84 USD*

NexGeneration UHV Suitcase Package for Room-Temperature Transfer - Long Throw

Product code: VSN40S(VRV)L

This common configuration of the NexGeneration UHV features a WM40 single-shaft wobblestick and a grabber tool for SHOM sample plates, Atom Probe Pucks or dove-tail cryo-shuttles for sample transfer. Other sample systems are available on request.
The additional MD40(Y0) single shaft linear/rotary feedthrough holds a customizable stack of sample receivers and the rear-view welded window offers an essential additional view of the transfer point, exactly where you need it.

NiMH-Battery Powered High-Voltage Controller -  UN 3496 Not Restricted, as per Special Provision A199

Extended length from gate valve flange = ~535mm (varies slightly depending on sample system)


List price:

3'885.79 CHF

4'187.86 EUR*
4'444.36 USD*

Single Shaft Wobblestick DN40CF

Product code: WM40-XXXX-YYYY

Magnetically driven single shaft wobblestick with mounting flange DN40CF.

Standard Stroke: 0100 / 0150 / 0200 / 0250 / 0300mm. Standard retracted length: 0060mm. Continuous rotation.

Customized Stroke: Min. 50mm / max. 700mm. Customized retracted length: Min. 60mm / max. 200mm


List price:

4'482.74 CHF

4'831.22 EUR*
5'127.12 USD*

High Torque Single Shaft Wobblestick DN40CF

Product code: WM40HT-XXXX-YYYY

High power magnetically driven single shaft wobblestick with mounting flange DN40CF.

Standard Stroke: 0100 / 0150 / 200mm. Standard retracted length: 0060mm. Continuous rotation.

Customized Stroke: Min. 50mm / max. 700mm. Customized retracted length: Min. 60mm / max. 200mm


List price:

4'674.21 CHF

5'037.57 EUR*
5'346.11 USD*

Wide Angle Single Shaft Wobblestick DN40CF

Product code: WMWA40-XXXX-YYYY

Wide angle magnetically driven single shaft wobblestick manipulator with mounting flange DN40CF. Extra wide angular range of +/-28°.

Standard Stroke: 0100 / 0150 / 0200mm. Standard retracted length: 0075mm. Continuous rotation.

Customized Stroke: Min. 50mm / max. 700mm. Customized retracted length: Min. 60mm / max. 200mm


Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024