Sign in

E-Beam Heater for Flag Style Plates

Product code: HSAS40-HSEBOM(P)-HSEFMS12P7(K)-XXXX

Completely configured E-Beam Sample Heating Stage Assembly for Omicron Sample Plates
Temperature range: RT ~ 2000°C.
(With K-type thermocouple RT ~ 1300°C.)


HSAS40 :: Made to Order
The thermocouple is in physical/electrical contact with the sample plate. Therefore, if high sample bias voltages are applied via the ‘sample bias’ feed-through, the thermocouple connector must be disconnected unless you are using a measuring device that can cope with the bias voltage being applied.

Download Drawing (PDF)

Download manual

HSAS40 :: Made to Order

Completely mounted on DN40CF-flange, incl. wiring and electrical feedthroughs.
MS HV type air side connector included K-type thermocouple installed.


Specifications: E-Beam Heater for Flag Style Plates

length X >= 177mm AND <= 500mm; standard 219mm

  • Distance from flange face to center (or surface) of sample plate: customized.
  • Temperature range: RT ~ 2000°C (with K-type thermocouple RT ~ 1300°C, fitted as standard )
  • Completely mounted on DN40CF-flange, incl. wiring and electrical feedthroughs.
  • MS HV type air side connector included.
  • fully UHV compatible materials
  • Controller not included

The thermocouple is in physical/electrical contact with the sample plate. Therefore, if high sample bias voltages are applied via the ‘sample bias’ feed-through, the thermocouple connector must be disconnected unless you are using a measuring device that can cope with the bias voltage being applied.

Possibly an end-user certificate (EUC) is required from purchaser.
Export licence from the State Secretariat for Economic Affairs (SECO) or Swiss Federal Office of Energy (SFOE) may be required

Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2020 | © vogy GmbH 2020