Sign in
About usProjectsVacuum WizardReferencesPrivacy PolicyPublicationsContactJobs - offene Stellen (1)ManualsHome
Online catalogue and pricelistWobblestick Manipulators WMWobblestick Manipulators WMGWobblestick AccessoriesSample TransportersSample Transporter AccessoriesSample Transporter MotorizationLinear/Rotary FeedthroughsLinear/Rotary Feedthrough AccessoriesLinear/Rotary Feedthrough MotorizationRotary FeedthroughsPort AlignersSample HoldersSample Receivers and -CarriersSample Heating StagesADHSOMPBN50S
Simple Shaft Adapter for the PBN50 Heating StageHSOMPBN50
PBN Heater Assembly for Flag Style PlatesRECOMDC
DC-heating Drawer Style Receivers for DC Flag Style PlatesRECOMDCRA
DC-heating Drawer Style Receivers with a Central Opening for Optical Access from the Rear, for DC Flag Style PlatesHSAS40-HSEBOM(P)-HSEFMS12P7(K)
E-Beam Heater for Flag Style PlatesHSASM40-MD16-ADCF16TS-TSMDH-HSMDDCOM
Direct Current Heater for Flag Style PlatesHSASM40-TIPEBFE2-MD16(TS)-ESFC
Preparation Station for STM TipsSHOMDC
Sample Plate for Direct Current HeatingSHOMDC(N)
Sample Plate for Direct Current HeatingSHOMDCRA
Sample Plate for Direct Current Heating, with Central Opening for Optical Access from the RearRECOMDCVTRA Special Offer
Receiver for DC-Heating and Cryo-Cooling with a Central Opening for Optical Access from the RearRECOMHTR1001S
Receptacle for SHOM sample plates RECOMZEBH
Receptacle for SHOM on VG-Omniax E-beam heaterCF-HardwareCF-FlangesIn-Vacuum Connectors and WiringFastenersBall-BearingsUHV SuitcaseUHV Suitcase AccessoriesUHV Suitcase Docking StationsLoad Lock SystemsNEG-ION pumpsGlove BoxesLaboratory EquipmentCryo EquipmentMultiaxis Boomerax ManipulatorsXY-ManipulatorsZ-ManipulatorsZ-Manipulator AccessoriesXY-Manipulators AccessoriesUHV-SystemsSpecial OffersPrecision Contract ManufacturingIn-Vacuum AccessoriesBakeout equipment

Direct Current Heater for Flag Style Plates

Product code: HSASM40-MD16-ADCF16TS-TSMDH-HSMDDCOM-XXXX-YYYY

Composed of a sample heating stage for SHOMDC samle holders clamped on an MD16(TS) Linear/Rotary Feedthrough, this fully configured assembly is completely mounted on a DN40CF-flange, including wiring and the electrical feedthrough.

By means of direct current heating of SHOMDC flag style sample plates, it provides the optimal method of for example preparing semiconductor surfaces like the Si 7x7 reconstruction.

Maximum operating temperature is limited to approximately 1000°C.

Specifications: Direct Current Heater for Flag Style Plates

linear travel X >= 50mm AND <= 450mm; standard 0mm
retracted length Y >= 80mm AND <= 165mm; standard 80mm

  • Distance flange face to center of sample plate: customized
  • Heating: up to approx. 1000°C
  • fully UHV compatible materials
  • Controller not included
  • min. retracted length depend on linear travel

download drawing (PDF)

Possibly an end-user certificate (EUC) is required from purchaser.
Export licence from the State Secretariat for Economic Affairs (SECO) or Swiss Federal Office of Energy (SFOE) may be required

Options

The following is a list of compatible options for HSASM40-MD16-ADCF16TS-TSMDH-HSMDDCOM Direct Current Heater for Flag Style Plates.

List price:

1'381.00 CHF

1'258.20 EUR*
1'513.26 USD*

Sample Plate for Direct Current Heating

Product code: SHOMDC

Sample holder featuring two mounting platforms for a semiconductor bar. The two contact rails are electrically isolated by Al2O3 washers.

Requires RECOMDC sample receiver with two high current electrical contacts.


List price:

1'398.00 CHF

1'273.69 EUR*
1'531.89 USD*

Sample Plate for Direct Current Heating

Product code: SHOMDC(N)

Sample holder featuring two mounting platforms for a semiconductor bar. One of the two contact rails is grounded with metallic (Mo) spacers.

Requires RECOMDC sample receiver with two high current electrical contacts.


Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2021 | © vogy GmbH 2021