Sign in

PBN Heating Station for Flag Style Plates

Product code: HSASOM40(PBN)-YYYY

Composed of a PBN pyrolitic boron nitride sample heating stage for SHOM samle holders, this fully configured assembly is completely mounted on a DN40CF (2.75") flange, including wiring and the electrical feedthrough.

This provides complete, ready to use solution for sample heating/ annealing under UHV conditions up to 1000°C.

Specifications: PBN Heating Station for Flag Style Plates

retracted length Y >= 133.8mm AND <= 700mm; standard 133.8mm

  • Distance from flange face to center (or surface) of sample plate: customized
  • Completely mounted on DN40CF-flange, incl. wiring and electrical feedthroughs.
  • PBN Heater Assembly:
    • Maximum Temperature: ~1000°C
    • Maximum Power: 120W (40V, 3.0A at ~1000°C)
    • Installed Thermocouple:  K-type (chromel/alumel)
    • fully UHV compatible materials:
      • Screws/ Washers: Molybdenum, stainless steel (grade A4)
      • Mounting Sleeves: Stainless Steel (1.4301)
      • Isolators: Ceramics (Al203)
      • Sample Plate Receiver: Molybdenum
      • Body/ Housing: Molybdenum
      • Boralectric Heater: Pyrolytic boron nitride, pyrolytic graphite
    • Sample reciever option:
      • sample electrically insulated (default)
      • sample grounded to body
  • Air side cable included:
    • Cable length: 6m
    • Side A: 4-pin industry standard MS air side connector, two K-Type TC pairs
    • Side B:
      • K-Type (chromel/alumel) miniature thermocouple connector
      • 3x safety 4mm banana plugs (red, black & yellow)
  • Packaging included
  • Power Supply: Not included (Recommendation: Power 150W, Voltage Range: 0-50V, Current Range: 0-5A)
  • Controller not included
  • Tolerances:
    • Machined Parts:  ISO 2768-m-K

Downloads:  drawing (pdf)  /  3D model (stp)  / manuals

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024