Sign in

Customized Length Linear/Rotary Feedthrough DN40CF

Product code: MD40-XXXX-YYYY

MD40 miniature linear rotary feedthroughs are recommended as compact sample transporters for short and intermediate linear travel ranges up to approximately 300mm, although up to 500mm is possible. They can be used wherever a rotary motion at a specific linear position has to be performed. An adjustable stop ring can be set at a specific linear position and a thumb screw is provided to lock the outer magnet. Due to its relatively high torque of 0.5Nm and linear force of 30N, considerable force can be transferred to any gear inside vacuum if necessary. A high torque version with 1Nm and 60N is also available.

 

Order code: MD40-XXXX-YYYY
XXXX: linear travel in millimeters, min 50mm, max 500mm
YYYY: retracted length, flange face to end of shaft in millimeters, min 11.8mm, max 200mm

 


Specifications: Customized Length Linear/Rotary Feedthrough DN40CF

linear travel X >= 50mm AND <= 750mm
retracted length Y >= 11.8mm AND <= 250mm; standard 30mm

  • Linear travel: customized
  • Retracted shaft length: customized
  • Mounting flange: DN40CF (2.75" O.D.)
  • Linear force: 30N
  • Torque: 0.5Nm (1Nm with HT option)
  • Maximum bakeout temperature: 150°C
  • Pressure range 1E-11mbar to 1000mbar.
  • Fully UHV compatible materials.

download drawing

download MD deflection in pdf format

download manual

Options

The following is a list of compatible options for MD40 Customized Length Linear/Rotary Feedthrough DN40CF.

List price:

988.00 CHF

876.97 EUR*
1'024.15 USD*

Grabber Tool ID 8mm for SHOM Plates

Product code: GRABSHOM

Tool for grabbing and handling SHOM flag style sample plates, using either a single shaft linear/rotary feedthrough or GMD40/RM40 sample transporter.


List price:

3'920.00 CHF

3'479.50 EUR*
4'063.44 USD*

Motorized Linear Drive for MD40 Feedthrough

Product code: DRVMDMOTL

1-axis motorized high precision drive for MD40 linear/rotary feedthroughs, for automatic and reproducible extension of the shaft. Rotary motion is done manually.


List price:

5'920.00 CHF

5'254.75 EUR*
6'136.62 USD*

Motorized Linear and Rotary Drive for MD40 Feedthrough

Product code: DRVMDMOTLR

2-axis motorized high precision drive for MD40 linear/rotary feedthroughs, for automatic and reproducible extension and rotation of the shaft.


List price:

2'145.00 CHF

1'903.96 EUR*
2'223.49 USD*

Flat Revolving Sample Carrier for SHOM sample plates

Product code: RSCFL4OM

Especially compact carrier for four SHOM sample plates. Fits to KS load locks and all MD, RM40 and GMD sample transporters.


List price:

300.00 CHF

266.29 EUR*
310.98 USD*

Tube Support for MD40 and MD16-ADCF16TS

Product code: TSMD

Tube Support for MD40 and MD16-ADCF16TS.
Two parallel 8mm diameter shafts are protecting the tube unit against accidental bending.


List price:

250.00 CHF

221.91 EUR*
259.15 USD*

Tube Support for MD40 and MD16-ADCF16TS single sided

Product code: TSMDH

Single sided tube support for MD16(TS) and MD40.
One 8mm diameter shaft protects the tube unit from accidental bending.


List price:

215.00 CHF

190.84 EUR*
222.87 USD*

Upgrade to 200°C Bakeable Version of Single Shaft Wobblesticks and Single L/R Feedthroughs

Product code: UPGRADEHB_MKS

Upgrade from 150°C to 200°C Bakeout Temperature for Single Shaft Wobblesticks and L/R Feedthroughs.


List price:

840.00 CHF

745.61 EUR*
870.74 USD*

Alignment and Protection Rail for L/R Feedthrough on VSN40S(V)

Product code: TSMDVSNV

Alignment and Protection Rail for Linear/Rotary Feedthrough on NexGeneration UHV Suitcase VSN40S(V)

Configuration example shown below, right: Configuration example VSN40S(VPV)-495-MDG40-PGWMS(OMH)-TSMDVSNV-MD40(Y0)-RECOMSTACK(D7)H-TSMDH


Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2018 | © vogy GmbH 2018