Sign in

Motorized Linear and Rotary Manipulator DN40CF with Sample Storage Stack

Product code: MD40-0200-0030-DRVMDMOTLR-RECOMSTACK(03H00S02H04S)H

This is an MD40 linear/rotary feedthrough, equipped with a Nanotec ST2018L0804 2-phase stepper motor-driven linear and rotary actuator, as well as a sample stack for SHOM flag style sample plates.

The sample stack provides 3 single spaced and two double spaced storage slots.
With a 2mm pitched spindle, a readout of 0.05mm is possible. Alternatively, a 1mm pitched spindle provides even higher resolution.

Rotation of the shaft is activated via the gearbox of a second stepper motor.
The sturdy linear unit ensures unchanging alignment of all components and consistent positioning.

Specifications: Motorized Linear and Rotary Manipulator DN40CF with Sample Storage Stack

MD40-DRVMDMOTLR Linear/Rotary manipulator with motorized precision drive

  • linear drive unit DRVMD: 2mm pitched spindle drive (or 1mm on request)
  • ruler with 1mm scale
  • linear travel: 100mm, 150mm or 200mm
  • mounting flange DN40CF (2,75" O.D.)  → also available with DN16CF (1.33" O.D.) or DN63CF (4,5" O.D.)
  • linear force: 30N
  • torque: 0.5Nm
  • manipulator bakeout temperature: 200 °C max. (without stepper motor, according to the manual)
  • pressure range 1E-11mbar to 1000mbar
  • fully UHV compatible materials

Downloads: manuals

Download drawing

3D-model available on request

Stepper Motor Linear Drive:

  • Voltage/Phase: 3.22 VDC
  • Amps/Phase: 1.4
  • Resistance/Phase: 2.3+/-10% Ohms
  • Holding torque: 0.117 Nm
  • Step angle: 1.8°+/-5%
  • controller not included

Datasheet (pdf)

Stepper Motor Rotary Drive:

  • Voltage/Phase: 4.8 VDC
  • Amps/Phase: 0.8
  • Resistance/Phase: 6.0+/-15% Ohms
  • Holding torque: 0.036 Nm (without planetary gear unit)
  • Step angle: 1.8°+/-5%
  • Planetary gear: GPLL22-25
    • reduction: 25.2
    • Efficiency 70%
    • Max. torsional backlash 150 ´(arcminutes)
  • controller not included

Datasheet (pdf)

Possibly an end-user certificate (EUC) is required from purchaser.
Export licence from the State Secretariat for Economic Affairs (SECO) or Swiss Federal Office of Energy (SFOE) may be required

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024