1'141.72 EUR *
1'238.54 USD *
Prices listed are EXW Zurich (Incoterms® 2020).
Prices are subject to change without notice.
Minimum order value: 600.00 CHF
(excl. taxes/packaging/shipping costs).
Pricing is in CHF.
Prices marked with an asterisk (*) in EUR & USD are for reference only.
Exchange rates:
1 EUR = 0.97171 CHF
1 CHF = 1.0291 EUR
1 USD = 0.89575 CHF
1 CHF = 1.1164 USD
Port aligner DN40CF (2.75" OD), L=90 +/-5mm, free bore 38mm
Edge welded bellows port aligner with pivot mounts
Three left/right threaded hexnuts allow for angular as well as linear adjustment. The alignment screws are equipped with pivot mounts on one end and are bolted to the CF-Flange on the other end. Both flanges are DN40CF with through holes.
This simple device is particularly useful for the angular alignment of RM and GMD sample transporters.
adds -90.0 to dimension Y of the main product
Edge welded bellows port aligner with pivot mounts
Downloads: drawing (pdf) / 3D-model (stp)
The PA40 Port Aligner DN40CF suits the following products:
9'784.81 EUR*
10'614.57 USD*
Ready to use DC Heating Stage for direct current heating sample plates (SHOMDC) with mounting flange DN40CF.
For preparing semiconductor surfaces like the Si 7x7 reconstruction for instance, the best and most simple way is usually direct current heating using SHOMDC sample holders.
10'760.41 EUR*
11'672.90 USD*
Ready to use DC Heating Stage for direct current heating sample plates (SHOMDC) with mounting flange DN40CF.
The heater is mounted on a linear / rotary feedthrough.
For preparing semiconductor surfaces like the Si 7x7 reconstruction for instance, the best and most simple way is usually direct current heating using SHOMDC sample holders.
16'743.68 EUR*
18'163.55 USD*
Ready to use PBN Heating Stage for flag style plates (SHOM) with a DN40CF mounting flange.
17'874.67 EUR*
19'390.45 USD*
Ready to use PBN Heating Stage for flag style plates (SHOM) with a DN40CF mounting flange.
2'340.97 EUR*
2'539.48 USD*
Magnetically driven single shaft linear/rotary feedthrough with mounting flange DN40CF.
3'482.74 EUR*
3'778.07 USD*
High-torque magnetically-driven single shaft linear/rotary feedthrough with mounting flange DN40CF.
4'404.61 EUR*
4'778.12 USD*
Magnetically driven single shaft sample transporter with mounting flange DN40CF. Built with superior slide bearing technology for long-lifetime and smooth operation.
7'244.41 EUR*
7'858.74 USD*
Vacuum-side-all-metal magnetically driven dual shaft sample transporter with independent rotary motion of the inner shaft. Sapphire hybride ball bearings for extra durability and smooth operation are guiding a tubular outer shaft with a square crossection as well as the inner shaft. Recommended for travel ranges >750mm and for heavier loads.
8'983.08 EUR*
9'744.85 USD*
Vacuum-side-all-metal dual rotary magnetically driven dual shaft sample transporter with independent rotary motion of both, the inner and outer shafts.
Sapphire hybride ball bearings for extra durability and smooth operation are guiding a tubular outer shaft with a square crossection as well as the inner shaft.
6'407.54 EUR*
6'950.90 USD*
Magnetically driven sample transporter with independent rotary motion of the inner as well as the outer shaft. Slide bearings for linear motion, sapphire hybrid bearings for inner shaft. Throughout guarantee for long-lifetime and smooth operation even after numerous bakeout cycles.