Sign in

Parallel Pincer for SHOM Flag Style Plates

Product code: PGWMP(OM)

Mounted to a WMG40 wobblestick manipulator and in combination with the fine adjuster option MKWMGFC, this pincer can essentially be used like a pair of precise tweezers for performing very delicate manipulations. The PGWMP(OM) is made with the appropriate groove to fetch SHOM style sample plates. In its standard version, angular degree of freedom of the sample plate held by the pincer allows for dangling of the sample. Exact values for the clearance of the sample plate are given in the drawing. For a firmer grip of the plate, please specify the (OMH) option.


Specifications: Parallel Pincer for SHOM Flag Style Plates

adds 45.0 to dimension Y of the main product

  • jaw opening: 0-13mm
  • bakeout temperature: 150deg C max.
  • material: stainless steel 1.4301, Berylco 25
  • required linear stroke to open jaws 13mm: 2.2mm

download drawing

Options

The following is a list of compatible options for PGWMP(OM) Parallel Pincer for SHOM Flag Style Plates.

List price:

see pricelist below

Flag style sample plate

Product code: SHOM

Commonly used flag style holder SHOM, available in a variety of materials and customized versions.

SHOM(ST) - SHOM(CU) - SHOM(CUBE) - SHOM(TI) - SHOM(MO) - SHOM(TA) - SHOM(SH) - SHOM(AL2O3) - SHOM(W) - SHOM(SiC)


List price:

on request

Flag style sample plate with 3 slits

Product code: SHOM3S

Commonly used flag style holder SHOM3S with 3 slots for receiver RECOM3S, available in a variety of materials and customized versions.

SHOM3S(ST) - SHOM3S(CU) - SHOM3S(CUBE) - SHOM3S(TI) - SHOM3S(MO) - SHOM3S(TA) - SHOM3S(SH) - SHOM3S(W) - SHOM3S(SiC)


List price:

1'526.00 CHF

1'273.15 EUR*
1'575.96 USD*

Sample Holder with 13 electrical contacts

Product code: SHOMEC13

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. Compatible with standard sample transfer systems for flag style holders. Requires RECOMEC13 sample receptor assembly.

Materials: Molybdenum, Beryllium-Copper, Stainless Steel. Isolators: shapal M    -    REV 23.05.2014 UM


List price:

1'986.00 CHF

1'656.93 EUR*
2'051.02 USD*

Sample Holder with 13 electrical contacts and temperature sensor

Product code: SHOMEC13(LTDT)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. With pre-installed lake shore DT-670 silicone diode temperature sensor. Requires RECOMEC13(LT) sample receptor assembly.

Material: Molybdenum, Shapal M      -       REV 23.05.2014 UM


List price:

185.00 CHF

154.35 EUR*
191.06 USD*

Flag Style Sample Plate, 3xM1.4, Leaf Springs

Product code: SHOM3T(ST)

Flag style sample plate, three threads M1.4, incl. cheesehead screws and leaf springs
Material: stainless steel 1.4301 (AISI 304L)
REV 11.04.2014 UM


List price:

on request

Sample Holder for Single Crystals K005, A=8mm, B=5mm, D=1mm out of Molybdenum

Product code: SHOMCHK005(08-05-01-MO)

Example of a flag style sample holder for type K005 single crystals. For other single crystal types, please contact us.


List price:

1'281.00 CHF

1'068.75 EUR*
1'322.94 USD*

Sample Plate for Direct Current Heating

Product code: SHOMDC

Sample holder featuring two mounting platforms for a semiconductor bar. The two contact rails are electrically isolated by Al2O3 washers.

Requires RECOMDC sample receiver with two high current electrical contacts.


List price:

1'298.00 CHF

1'082.93 EUR*
1'340.49 USD*

Sample Plate for Direct Current Heating

Product code: SHOMDC(N)

Sample holder featuring two mounting platforms for a semiconductor bar. One of the two contact rails is grounded with metallic (Mo) spacers.

Requires RECOMDC sample receiver with two high current electrical contacts.


List price:

on request

Sampleholder Hybride Block style and SHOM

Product code: SHBSOMHM

Compatible with SHBS block style as well as SHOM systems. Materials: Molybdenum, CuBe, Titanium. This particular model has a central gap for applying magnetic field using a horseshoe magnet.


Compatibility

The PGWMP(OM) Parallel Pincer for SHOM Flag Style Plates suits the following products:

List price:

4'465.00 CHF

3'725.18 EUR*
4'611.17 USD*

Dual Shaft Linear/ Rotary Feedthrough

Product code: MDG40-XXXX-YYYY

Magnetically driven dual shaft linear/ rotary feedthrough with mounting flange DN40CF.
REV: 02.12.2010 DvG


List price:

4'625.00 CHF

3'858.67 EUR*
4'776.41 USD*

Dual Shaft Linear/ Rotary Feedthrough DN40CF RL

Product code: MDG40(RL)-XXXX-YYYY

Magnetically driven dual shaft linear/ rotary feedthrough with mounting flange DN40CF and rotation lock.
Please select your prefered tube support necessary for rotation lock.
REV: 02.12.2010 DvG


List price:

5'090.00 CHF

4'246.62 EUR*
5'256.64 USD*

Customized Length Dual Shaft Wobblestick DN40CF

Product code: WMG40-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with mounting flange DN40CF.

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 63mm), REV 26.08.2014 UM


List price:

5'390.00 CHF

4'496.91 EUR*
5'566.46 USD*

High Precision Actuator Dual Shaft Wobblestick DN40CF

Product code: WMG40(FC)-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with fine adjuster magnetic coupling.

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 63mm), REV: 08.09.2014 JK


List price:

5'690.00 CHF

4'747.21 EUR*
5'876.28 USD*

Dual Shaft Wobblestick Wide Angle DN40CF

Product code: WMGWA40-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with mounting flange DN40CF.
WMGWA40 models feature an extra wide angular range of +/-28°.

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 77mm), REV: 08.09.2014 JK


Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2018 | © vogy GmbH 2018