4'678.41 EUR *
5'412.73 USD *
Prices listed are EXW Zurich (Incoterms 2010), excl. packing.
This price list replaces all previously published lists.
Prices are subject to change without notice.
Minimum order value: 150.00 CHF.
Pricing is in CHF.
Prices marked with an asterisk (*) in EUR & USD are for reference only.
Exchange rates:
1.1521 EUR/CHF
0.9958 USD/CHF
Magnetically driven dual shaft wobblestick manipulator with fine adjuster magnetic coupling.
XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 63mm), REV: 08.09.2014 JK
-400x230.png&width=400)
Dual shaft wobblestick manipulators are designed to operate a pincer grip. The fine adjuster magnetic coupling allows a precise control of the opening/closing of the pincers. The pincer is opened and closed by turning a thumbscrew. A variety of pincers are available for almost any type of sampleholder. Please visit the Wobblestick accessories section for additional information. Dual shaft wobblesticks are fully rotateable and allow an angular deflection of +/-20 degrees.
|
Order code standard length
Order code customized version:
YYYY: retracted length, flange face to end of shaft in millimeters (min. 63mm) |
Options and accessories:
|
linear travel X ≥ 50mm AND ≤ 600mm
retracted length Y ≥ 63mm AND ≤ 200mm; standard 63mm
note 1: if mounted to wobblestick flange
The following is a list of compatible options for WMG40(FC) High Precision Actuator Dual Shaft Wobblestick DN40CF.
1'241.21 EUR*
1'436.03 USD*
Standard clearance, sample play of +/-8°.
217.00 EUR*
251.05 USD*
External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: straddled
REV. 24.5.2011 UM
Base model for application specific machining of the jaws.
REV 2014 UM
2'595.26 EUR*
3'002.61 USD*
"UHV-Tweezers" for extremely delicate manipulations. Standard clearance, sample play of +/-8°
REV 19.10.16 JB
1'900.88 EUR*
2'199.24 USD*
Standard clearance, sample play of +/-8°.
REV: 12.08.2014 UM
2'595.26 EUR*
3'002.61 USD*
"UHV-Tweezers" for extremely delicate manipulations. Reduced clearance, sample play of +/-2°. Recommended for MDG40 linear-/rotary feedthroughs.
REV 19.10.2016 JB
3'428.52 EUR*
3'966.66 USD*
Customized pincer for Specs Joule-Thompson SPM respectively the Specs TytoTM Precision SPM Head.
1'241.21 EUR*
1'436.03 USD*
Reduced clearance, play of +/-2°. Optimized for firm grip. Recommended for MDG40 linear-/rotary feedthroughs.
1'354.05 EUR*
1'566.58 USD*
Longer version, standard clarance, sample play of +/-8°
1'354.05 EUR*
1'566.58 USD*
Longer version, reduced clearance, play of +/-2°. Optimized for firm grip. Recommended for MDG40 linear-/rotary feedthroughs.
1'666.52 EUR*
1'928.10 USD*
Straight pincer grip with especially narrow head and ultra slim jaws, customized for use with Omicron UHV LT-SPM.
1'645.69 EUR*
1'904.00 USD*
Pincer Grip for VG-Stub Style Sample Holders.
186.62 EUR*
215.91 USD*
Upgrade from 150°C to 200°C Bakeout Temperature for Dual Shaft Wobblesticks and Dual L/R Feedthroughs.
1'111.01 EUR*
1'285.40 USD*
Alignment +/-12mm and Protection Rail for Wobblestick on NexGeneration UHV Suitcase VSN40S(V).
0.00 EUR*
0.00 USD*
Electrically isolated jaws for DC-heating, sample bias or current measurement.
REV 12.08.2014 UM
325.49 EUR*
376.58 USD*
Installed to the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original orthogonal pincer grip manufactured by Omicron.
REV: 23.5.2011 UM
151.90 EUR*
175.74 USD*
Installed to the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original orthogonal pincer grips GA02-1810/GA02-1119 manufactured by Omicron.
REV: 23.5.2011 UM
151.90 EUR*
175.74 USD*
Installed on the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original straight pincer grip manufactured by Omicron.
Pincer Grip Model: GA02-182
REV: 23.5.2011 UM
342.85 EUR*
396.67 USD*
External support rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use - also in non-horizontal usage.
Please note: only for WM or WMG(FC)
REV. 25.03.2013 DvG
251.71 EUR*
291.22 USD*
External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: inline
REV. 24.5.2011 UM
342.85 EUR*
396.67 USD*
External support and parking rail for vertically mounted wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
REV. 02.04.2013 DvG