5'136.77 EUR *
5'785.46 USD *
Prices listed are EXW Zurich (Incoterms 2010), excl. packing.
This price list replaces all previously published lists.
Prices are subject to change without notice.
Minimum order value: 150.00 CHF.
Pricing is in CHF.
Prices marked with an asterisk (*) in EUR & USD are for reference only.
Exchange rates:
1.1077 EUR/CHF
0.9835 USD/CHF
Magnetically driven dual shaft wobblestick manipulator with mounting flange DN40CF.
WMGWA40 models feature an extra wide angular range of +/-28°.
XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 77mm), REV: 08.09.2014 JK
Essentially identical to the normal dual shaft wobblestick, the WA-models are suitable for situations where wide angular range is important. However special care has to be taken to ensure that the welded bellows and the shaft of the wobble stick do not strike the tube or chamber walls, i.e. a very short oversize CF40 should be provided for the installation. If in doubt, please contact us for detailed information on this subject.
Dual shaft wobblestick manipulators are designed to operate a pincer grip. Slight pressing of the two halfs of the knob against each other, will open the pincer. A variety of pincers are available for almost any type of sampleholder. Please visit the Wobblestick accessories section for additional information.
Dual shaft wide angle wobblesticks are fully rotateable and allow for an angular deflection of +/-28 degrees.
|
Order code standard length
Order code customized version:
YYYY: retracted length, flange face to end of shaft in millimeters (min. 77mm) |
Options and accessories:
|
linear travel X >= 0mm AND <= 690mm
retracted length Y >= 75mm AND <= 200mm; standard 77mm
note 1: if mounted to wobblestick flange
The following is a list of compatible options for WMGWA40 Dual Shaft Wobblestick Wide Angle DN40CF.
194.10 EUR*
218.61 USD*
Upgrade from 150°C to 200°C Bakeout Temperature for Dual Shaft Wobblesticks and Dual L/R Feedthroughs.
338.54 EUR*
381.29 USD*
Installed to the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original orthogonal pincer grip manufactured by Omicron.
REV: 23.5.2011 UM
157.99 EUR*
177.94 USD*
Installed to the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original orthogonal pincer grips GA02-1810/GA02-1119 manufactured by Omicron.
REV: 23.5.2011 UM
157.99 EUR*
177.94 USD*
Installed on the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original straight pincer grip manufactured by Omicron.
Pincer Grip Model: GA02-182
REV: 23.5.2011 UM
2'089.92 EUR*
2'353.84 USD*
Standard clearance, sample play of +/-8°.
REV: 12.08.2014 UM
0.00 EUR*
0.00 USD*
Electrically isolated jaws for DC-heating, sample bias or current measurement.
REV 12.08.2014 UM
2'699.29 EUR*
3'040.16 USD*
"UHV-Tweezers" for extremely delicate manipulations. Standard clearance, sample play of +/-8°
REV 19.10.16 JB
2'699.29 EUR*
3'040.16 USD*
"UHV-Tweezers" for extremely delicate manipulations. Reduced clearance, sample play of +/-2°. Recommended for MDG40 linear-/rotary feedthroughs.
REV 19.10.2016 JB
1'566.31 EUR*
1'764.11 USD*
Base pincer model without defined grooves for application-specific machining of the jaws.
1'290.96 EUR*
1'453.99 USD*
Standard clearance, sample play of +/-8°.
1'290.96 EUR*
1'453.99 USD*
Reduced clearance, play of +/-2°. Optimized for firm grip. Recommended for MDG40 linear-/rotary feedthroughs.
1'408.32 EUR*
1'586.17 USD*
Longer version, standard clarance, sample play of +/-8°
1'408.32 EUR*
1'586.17 USD*
Longer version, reduced clearance, play of +/-2°. Optimized for firm grip. Recommended for MDG40 linear-/rotary feedthroughs.
225.69 EUR*
254.19 USD*
External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: straddled
REV. 24.5.2011 UM
261.80 EUR*
294.87 USD*
External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: inline
REV. 24.5.2011 UM
356.59 EUR*
401.63 USD*
External support and parking rail for vertically mounted wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
REV. 02.04.2013 DvG