Prices listed are EXW Zurich (Incoterms® 2020).
Prices are subject to change without notice.
Minimum order value: 600.00 CHF
(excl. taxes/packaging/shipping costs).
Pricing is in CHF.
Prices marked with an asterisk (*) in EUR & USD are for reference only.
Exchange rates:
1 EUR = 0.9296 CHF
1 CHF = 1.0757 EUR
1 USD = 0.8362 CHF
1 CHF = 1.1959 USD
105.42 EUR *
117.20 USD *
In certain scenarios, restricting the opening angle of PGWMS pincer jaws can be advantageous. This is especially true for longer pincers like the PGWMS(L) models. To achieve this limitation, a ring is installed between the two halves of the outer magnet assembly.
925.13 EUR *
1'028.46 USD *
The Dicronite ™ coated ball bearings are an ideal solution for UHV applications. They are ultrasonically cleaned and coated with Tungsten-Disulfide.
Dicronite ™ coated ball bearings are an ideal solution for UHV applications. They are ultrasonically cleaned and coated with Tungsten-Disulfide.
699.23 EUR *
777.33 USD *
The Dicronite ™ coated ball bearings are an ideal solution for UHV applications. They are ultrasonically cleaned and coated with Tungsten-Disulfide.
Dicronite ™ coated ball bearings are an ideal solution for UHV applications. They are ultrasonically cleaned and coated with Tungsten-Disulfide.
1'021.94 EUR *
1'136.09 USD *
The Dicronite ™ coated ball bearings with ceramic balls are an ideal solution for UHV applications. They are ultrasonically cleaned and coated with Tungsten-Disulfide.
10'228.06 EUR *
11'370.49 USD *
Ready to use DC Heating Stage for direct current heating sample plates (SHOMDC) with mounting flange DN40CF.
For preparing semiconductor surfaces like the Si 7x7 reconstruction for instance, the best and most simple way is usually direct current heating using SHOMDC sample holders.
11'247.85 EUR *
12'504.19 USD *
Ready to use DC Heating Stage for direct current heating sample plates (SHOMDC) with mounting flange DN40CF.
The heater is mounted on a linear / rotary feedthrough.
For preparing semiconductor surfaces like the Si 7x7 reconstruction for instance, the best and most simple way is usually direct current heating using SHOMDC sample holders.
2'847.29 EUR *
3'165.32 USD *
Magnetically driven single shaft linear/rotary feedthrough with mounting flange DN40CF and zero retracted length. Especially suitable in this specification for implementation with NexGeneration UHV Suitcases.
1'788.49 EUR *
1'988.26 USD *
This receiver is made for precise and especially reproducible positioning of SHOM3S slotted sample plates. Ruby spheres fixate the position of the sample by a proper three-point contact.
Material: molybdenum
1'041.99 EUR *
1'158.37 USD *
This receiver is made for precise and especially reproducible positioning of SHOM3S slotted sample plates. Ruby spheres fixate the position of the sample by a proper three-point contact.
Material: Stainless steel 1.4301
6'830.90 EUR *
7'593.88 USD *
Cryo-Receiver for flag style sample plates with 13 electrical contacts and locking mechanism.
Release V2 can be installed in arbitrary orientation. A lever mechanism presses the sample plate tightly to a cooling surface for cryogenic applications.
Accepts SHOMEC13 and all other SHOM standard flag style holders.
4'571.86 EUR *
5'082.52 USD *
Receiver for flag style sample plates with 13 electrical contacts and kinematic snap-in lock for reproducible positioning. Accepts SHOMEC13 holders.
1'674.45 EUR *
1'861.48 USD *
Efficient storage solution for SHOM flag-style sample plates. Features three zero-spaced slots and two 4mm-spaced slots.
Including straight (in-line) adapter for MD, RM40, GMD and WM type single shaft manipulators.
5'670.35 EUR *
6'303.71 USD *
Stage consisting of four towers, each tower featuring five double spaced slots for SHOM flag style sample plates. The sample plates are held in place by two beryllium copper leaf springs.
Hollow shaft sample transporter with mounting flange DN40CF. Built with superior slide bearing technology for long-lifetime and smooth operation. Hollow Shaft sample tranporters are recommended for extra long vertical travel ranges up to 2300mm and includes an in-vacuum brake.
The revolving sample carrier transports and stores two SHOM sample plates. The sample holders are typically placed into the RECOM receptors using a dual shaft WMG40 wobblestick with a PGWMS(OM)pincer grip. The RSCRMD2OM Revolving Sample Carrier RM for SHOM sample plates is compatible with RMD40 and RMDG40 Sample Transporter. REV 18.01.2012 DvG (UM)
0.00 EUR *
0.00 USD *
We plan, design and build system solutions for Synchrotron and FEL radiation set-ups and experiments. Presented are a few examples of implemented projects. For tailor made solutions please contact us.
Flat spring (leaf spring) for clamping samples on a SHOMT sample plate. Available in three different sizes and materials. Please contact the sales team to find out which materials we currently have available from stock and which can be made to order.
Commonly used flag style plates, available in a variety of materials and customized versions.
See Sample Holders for the full range of related products.
SHOM(ST) - SHOM(CU) - SHOM(CB) - SHOM(TI) - SHOM(MO) - SHOM(TA) - SHOM(AL2O3) - SHOM(SH) - SHOM(W) - SHOM(INCONEL)
The SHOM3S flag-style holder is designed with three slots that integrate perfectly with the RECOM3S drawer-style receptacle. These slots ensure precise and consistently reproducible positioning, supported by the receptacle's optimized three-point contact system. Available in various materials and customizable options to meet specific requirements.
SHOM3S(ST) - SHOM3S(CU) - SHOM3S(CUBE) - SHOM3S(TI) - SHOM3S(MO) - SHOM3S(TA) - SHOM3S(SH) - SHOM3S(W) - SHOM3S(SiC)
1'673.24 EUR *
1'860.13 USD *
Sample holder featuring two mounting platforms for a semiconductor bar. The two contact rails are electrically isolated by Al2O3 washers.
Requires RECOMDC sample receiver with two high-current electrical contacts.
1'693.84 EUR *
1'883.03 USD *
Sample holder featuring two mounting platforms for a semiconductor bar. One of the two contact rails is grounded with metallic (Mo) spacers.
Requires RECOMDC sample receiver with two high current electrical contacts.
1'974.92 EUR *
2'195.52 USD *
Sample holder featuring two mounting platforms for a semiconductor bar. The two contact rails are electrically isolated by Al2O3 washers.
Requires RECOMDCRA sample receiver with two high current electrical contacts.
1'974.92 EUR *
2'195.52 USD *
Sample holder featuring two mounting platforms for a semiconductor bar. The two contact rails are electrically isolated by Al2O3 washers.
Requires RECOMDCRA sample receiver with two high current electrical contacts.
1'848.92 EUR *
2'055.44 USD *
Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. Compatible with standard sample transfer systems for flag style holders. This product requires a RECOMEC13 sample receptor assembly.
Materials: Molybdenum, Beryllium-Copper, Stainless Steel. Isolators: shapal M
Belt drive with one hand wheel for linear- and a small, precise hand wheel for rotary motion. For easy handling of vertically mounted sample transporters RM40, RMJ40, RMD40 and GMD40.
32'003.01 EUR *
35'577.61 USD *
The Mini NexGeneration UHV Suitcase is the smallest standard version of our ultra compact, lightweight and modularly adaptable system to keep and carry your samples under true ultra-high vacuum conditions. It is delivered under vacuum condition, fully baked and ready to use.
This package contains a linear/rotary feedthrough and a storage stack or a grabber for SHOM sample plates.
NiMH-Battery Powered High-Voltage Controller - UN 3496 Not Restricted, as per Special Provision A199
54'270.65 EUR *
60'332.46 USD *
This common configuration of the NexGeneration UHV features a WM40 single-shaft wobblestick and a grabber tool for SHOM sample plates, Atom Probe Pucks or dove-tail cryo-shuttles for sample transfer. Other sample systems are available on request.
The additional MD40(Y0) single shaft linear/rotary feedthrough holds a customizable stack of sample receivers and the rear-view welded window offers an essential additional view of the transfer point, exactly where you need it.
NiMH-Battery Powered High-Voltage Controller - UN 3496 Not Restricted, as per Special Provision A199
Extended length from gate valve flange = ~335mm (varies slightly depending on sample system)
59'111.45 EUR *
65'713.94 USD *
This common configuration of the NexGeneration UHV features a WM40 single-shaft wobblestick and a grabber tool for SHOM sample plates, Atom Probe Pucks or dove-tail cryo-shuttles for sample transfer. Other sample systems are available on request.
The additional MD40(Y0) single shaft linear/rotary feedthrough holds a customizable stack of sample receivers and the rear-view welded window offers an essential additional view of the transfer point, exactly where you need it.
NiMH-Battery Powered High-Voltage Controller - UN 3496 Not Restricted, as per Special Provision A199
Extended length from gate valve flange = ~535mm (varies slightly depending on sample system)
