Sign in

Customized Length Dual Shaft Wobblestick DN40CF

Product code: WMG40-XXXX-YYYY

Dual Shaft wobblestick manipulators are designed to operate a pincer grip. Slight pressing of the two halfs of the knob against each other, will open the pincer. A variety of pincers are available for almost any type of sampleholder. Dual shaft wobblesticks are fully rotateable and allow for an angular deflection of +/-20 degrees.

Order code customized version:
  • WMG40-XXXX-YYYY
XXXX: linear travel in millimeters (min. 50mm)
YYYY: retracted length, flange face to end of shaft in millimeters (min. 63)

Wobblestick accessories

 

REV 25.08.2014 JK


Specifications: Customized Length Dual Shaft Wobblestick DN40CF

linear travel: ≤ 700mm
retracted length: ≥ 63mm and ≤ 763mm; standard 63mm

  • angular deflection +/-20 degrees (see note 1)
  • linear force: 30N
  • torque: 0.4Nm
  • bakeout temperature: 150deg C max.
  • pressure range 1E-11mbar to 1000mbar
  • fully UHV compatible materials

note 1: if mounted to wobblestick flange

download drawing

download manual

Options

The following is a list of compatible options for WMG40 Customized Length Dual Shaft Wobblestick DN40CF.

List price:

1'430.00 CHF

1'222.12 EUR*
1'460.08 USD*

Straight Pincer for SHOM Flag Style Plates

Product code: PGWMS(OM)

Standard clearance, sample play of +/-8°.


List price:

375.00 CHF

320.49 EUR*
382.89 USD*

Adapter for Omicron Pincer Grip SA02-1862 (STM1)

Product code: ADOMO

Installed to the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original orthogonal pincer grip manufactured by Omicron.
REV: 23.5.2011 UM


List price:

175.00 CHF

149.56 EUR*
178.68 USD*

Adapter for Omicron PincerGrip GA02-1810/GA02-1119

Product code: ADOMO2

Installed to the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original orthogonal pincer grips GA02-1810/GA02-1119 manufactured by Omicron.
REV: 23.5.2011 UM


List price:

175.00 CHF

149.56 EUR*
178.68 USD*

Adapter for Omicron Straight Pincer Grip GA02-182

Product code: ADOMS

Installed on the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original straight pincer grip manufactured by Omicron.
Pincer Grip Model: GA02-182
REV: 23.5.2011 UM


List price:

250.00 CHF

213.66 EUR*
255.26 USD*

Parking-/ Protection Rail for Wobblesticks DN40CF

Product code: TSWM

External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: straddled
REV. 24.5.2011 UM


List price:

850.00 CHF

726.43 EUR*
867.88 USD*

Aligner for Wobblesticks DN40CF

Product code: TSWMA

A useful accessory to align and keep the deflection angle of a wobblestick manipulator. Three thumbscrews are used to position the wobblestick axis.

Maximum deflection angle = +-8 degrees.
 


List price:

850.00 CHF

726.43 EUR*
867.88 USD*

Deflection Limiter (3deg) for Wobblesticks DN40CF

Product code: TSWMDL(3)

Deflection Limiter to restrict the angular deflection of wobblesticks to three degrees.


List price:

395.00 CHF

337.58 EUR*
403.31 USD*

Parking-/ Protection Rail for WM DN40CF vertical

Product code: TSWMV

External support and parking rail for vertically mounted wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
REV. 02.04.2013 DvG


List price:

395.00 CHF

337.58 EUR*
403.31 USD*

Protection Rail for Wobblesticks DN40CF - also for non-horizontal usage

Product code: TSWMF

External support rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use - also in non-horizontal usage.
Please note: only for WM or WMG(FC)
REV. 25.03.2013 DvG


List price:

290.00 CHF

247.84 EUR*
296.10 USD*

Inline Parking-/ Protection Rail for WM DN40CF

Product code: TSWMIL

External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: inline
REV. 24.5.2011 UM


List price:

345.00 CHF

294.85 EUR*
352.26 USD*

Lock Ring for TSWM DN40CF

Product code: TSWMLR

Lock ring for locking the external support rails TSWM with three or four knurled screws.
REV. 25.03.2013 DvG


List price:

295.00 CHF

252.12 EUR*
301.20 USD*

Bellows Protection for Wobblesticks

Product code: BP40

The BP40 enables angular movement of a wobblestick attached to flanges with tubes that have an inner diameter smaller than 40mm.


List price:

230.00 CHF

196.56 EUR*
234.84 USD*

Zero Length Reducing Flange CF63CF40 for Wobblesticks

Product code: ZLCF63CF40WM

Zero Length Reducing Flange CF63/CF40 with bevelled inner edges. Customized for use with wobblesticks.


List price:

1'896.00 CHF

1'620.37 EUR*
1'935.88 USD*

Straight Pincer Grip for VG-Stub Sample Holders

Product code: PGWMS(VGS)

Pincer Grip for VG-Stub Style Sample Holders.


List price:

1'560.00 CHF

1'333.22 EUR*
1'592.81 USD*

Long Straight Pincer for SHOM Flag Style Plates

Product code: PGWMSL(OM)

Longer version, standard clarance, sample play of +/-8°


List price:

1'560.00 CHF

1'333.22 EUR*
1'592.81 USD*

Hard Grip Long Straight Pincer for SHOM Flag Style Plates

Product code: PGWMSL(OMH)

Longer version, reduced clearance, play of +/-2°. Optimized for firm grip. Recommended for MDG40 linear-/rotary feedthroughs.
 


List price:

215.00 CHF

183.74 EUR*
219.52 USD*

Upgrade to 200°C Bakeable Version of Dual Shaft Wobblesticks and Dual L/R Feedthroughs

Product code: UPGRADEHB_MKWMG(FC)_HB

Upgrade from 150°C to 200°C Bakeout Temperature for Dual Shaft Wobblesticks and Dual L/R Feedthroughs.


List price:

2'190.00 CHF

1'871.63 EUR*
2'236.06 USD*

Orthogonal Pincer for SHOM Flag Style Plates

Product code: PGWMO(OM)

Standard clearance, sample play of +/-8°.
REV: 12.08.2014 UM


List price:

0.00 CHF

0.00 EUR*
0.00 USD*

Parallel Pincer with Isolated Jaws

Product code: PGWMP(DC)

Electrically isolated jaws for DC-heating, sample bias or current measurement.
REV 12.08.2014 UM


List price:

2'990.00 CHF

2'555.34 EUR*
3'052.89 USD*

Parallel Pincer for SHOM Flag Style Plates

Product code: PGWMP(OM)

"UHV-Tweezers" for extremely delicate manipulations. Standard clearance, sample play of +/-8°
REV 19.10.16 JB


List price:

2'990.00 CHF

2'555.34 EUR*
3'052.89 USD*

Hard Grip Parallel Pincer for SHOM Plates

Product code: PGWMP(OMH)

"UHV-Tweezers" for extremely delicate manipulations. Reduced clearance, sample play of +/-2°. Recommended for MDG40 linear-/rotary feedthroughs.
REV 19.10.2016 JB


List price:

1'280.00 CHF

1'093.92 EUR*
1'306.92 USD*

Alignment +/-12mm and Protection Rail for Wobblestick on VSN40S(V)

Product code: TSWMVSNV

Alignment +/-12mm and Protection Rail for Wobblestick on NexGeneration UHV Suitcase VSN40S(V).


List price:

on request

Customized Straight Pincer

Product code: PGWMS

Base model for application specific machining of the jaws.
REV 2014 UM


List price:

1'430.00 CHF

1'222.12 EUR*
1'460.08 USD*

Hard Grip Straight Pincer for SHOM Flag Style Plates

Product code: PGWMS(OMH)

Reduced clearance, play of +/-2°. Optimized for firm grip. Recommended for MDG40 linear-/rotary feedthroughs.
 


Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2018 | © vogy GmbH 2018