Sign in

E-Beam Heating Station for Flag Style Plates with Linear Travel & Rotation

Product code: HSASOM40(EBMD)-XXXX-YYYY-ZZZZ

Composed of an E-Beam heating stage for SHOM samle holders clamped on an MD16 Linear/Rotary Feedthrough, this fully configured assembly is completely mounted on a DN40CF (2.75") flange, including wiring and electrical feedthroughs.

This provides complete and customizable, ready to use solution for sample heating/ annealing under UHV conditions up to 2000°C.

Specifications: E-Beam Heating Station for Flag Style Plates with Linear Travel & Rotation

linear travel X >= 50mm AND <= 450mm; standard 100mm
retracted length Y >= 156mm AND <= 400mm; standard 160mm
receiver orientation Z >= 1 orien AND <= 3 orien; standard 1 orien

  • Distance from flange face to center (or surface) of sample plate: customized
  • Linear/Rotary Feedthrough:
    • standard lengths for linear travel: 100mm, 200mm, 300mm, 400mm, 500mm
    • linear force: 30N
    • rotation:
      • angle: +/- 166.75° deg
      • torque: 0.5Nm (1Nm with HT option)
    • bakeout temperature: 150deg C max.
    • pressure range 1E-11mbar to 1000mbar
  • Receiver orientation options:
    • Orientation 01 (flag perpendicular to axis)
    • Orientation 02 (flag perpendicular to axis, straight)
    • Orientation 03 (flag in-line with axis)
  • Temperature range: RT ~ 2000°C
  • Completely mounted on DN40CF-flange, incl. wiring and electrical feedthroughs
  • Eletrical Feedtroughts:
    • 4-Pin MS12 Type, CF16
      • Air-Side Connector Included (Cable Not Included)
      • Pin Material: Molybdenum
      • Maximum Voltage: 12kV
    • 1-Pin SHV Type, CF16
      • Air-Side Connector Included (Cable Not Included)
      • Maximum Voltage: 5kV
  • Packaging included
  • fully UHV compatible materials
  • Controller not included

Downloads: drawing (pdf)  /  3D models (stp)  / manuals

There is no thermocouple included in this standard version. The thermocouple would be in physical/electrical contact with the sample plate. Therefore, if high sample bias voltages are applied via the ‘sample bias’ feed-through, the thermocouple connector must be disconnected unless you are using a measuring device that can cope with the bias voltage being applied.

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024