Prices listed are EXW Zurich (Incoterms® 2020).
Prices are subject to change without notice.
Minimum order value: 600.00 CHF
(excl. taxes/packaging/shipping costs).
Pricing is in CHF.
Prices marked with an asterisk (*) in EUR & USD are for reference only.
Exchange rates:
1 EUR = 0.927949 CHF
1 CHF = 1.0776 EUR
1 USD = 0.905686 CHF
1 CHF = 1.1041 USD
For hat shaped single crystals such as the MaTeck K005 with OD=8mm, lip thickness 1mm, sample diameter <7mm
A new generation of crystal clamping!
This SHOMTCH flag style sample holder simplifies the process of mounting round or quadratic single crystals instance such as type (type K005), The four bent shoulders provide a simple and proper clamping in the center of the sample plate.
This example of a sample holder has a geometrical design that is laid out for single crystals with the dimensions: A (X) = 4 to 12 mm, C (Y) = 1 to 5 mm. This new Product is also to use for quadratic crystals of the same dimensions A(X) and C(Y). If you need information about the wide options of this Product, please do not hesitate to contact us.
For instance such as type K005 crystal (A = diameter X, B < A-1, C = Y)
Downloads: drawing (pdf)
201.49 EUR*
206.44 USD*
Commonly used flag style sample holder with 5x M1.4 screw holes.
The SHOMTCH(MO)0008-0001-0007 Flag Style Holder for Hat Shaped Single Crystals suits the following products:
1'199.20 EUR*
1'228.68 USD*
End effector for grabbing and handling SHOM flag style sample plates, using a single shaft wobblestick.
2'809.87 EUR*
2'878.94 USD*
Standard clearance, sample play of +/-8°.
1'735.69 EUR*
1'778.35 USD*
Standard clearance, sample play of +/-8°.
1'735.69 EUR*
1'778.35 USD*
Reduced clearance, sample play of +/-2°. Optimized for a firmer grip.
1'893.48 EUR*
1'940.02 USD*
Extended jaws, standard clarance, sample play of +/-8°
1'893.48 EUR*
1'940.02 USD*
Extended jaws, reduced clearance, sample play of +/-2°. Optimized for a firmer grip.
582.61 EUR*
596.93 USD*
Receiver for SHOM flag style holders
A multi purpose receiver for SHOM sample plates made out of copper-beryllium alloy - non-magnetic
1'207.70 EUR*
1'237.38 USD*
A multi purpose receiver for SHOM sample plates made out of molybdenum - non-magnetic and for low/high temperature application
509.78 EUR*
522.31 USD*
A multi purpose receiver for SHOM sample plates made out of stainless steel - standard
631.16 EUR*
646.67 USD*
A multi purpose receiver for SHOM sample plates made out of titanium - non-magnetic