Sign in

DC Heating Station for SHOMDC Sample Heating Plates

Product code: HSASOM40(DC)-YYYY-ZZZZ

Composed of a Sample receiver with two high-current electrical contacts for DC-heating of SHOMDC sample holders, this fully configured assembly is completely mounted on a DN40CF (2.75") flange, including wiring and the electrical feedthrough.

This provides complete, ready to use solution for sample heating/ annealing under UHV conditions.

Specifications: DC Heating Station for SHOMDC Sample Heating Plates

retracted length Y >= 107mm AND <= 400mm; standard 107mm
sample orientation Z >= 1 orien AND <= 2 orien; standard 1 orien

  • Distance from flange face to center (or surface) of sample plate: customized
  • Completely mounted on DN40CF-flange, incl. wiring and electrical feedthroughs.
  • Installed Thermocouple:  K-type (chromel/alumel)
  • Mounted DC Sample Plate Receiver RECOMDC:
    • Receiver orientation options:
      • Orientation 01 (flag perpendicular to axis)
      • Orientation 02 (flag perpendicular to axis, straight)
    • Fully UHV compatible materials:
      • Spheres: Ruby
      • Spring contacts, screws, washers for el. contacts: Molybdenum
      • Isolators: Shapal M
      • Body: Stainless steel 1.4301 (304L)
  • Sample Heating Plate SHOMDC: Sample Heating Plate is NOT INCLUDED in this assembly.
    • Minimum sample size (l x w x h): 8 x 1 x 0.2mm
    • Maximum sample size (l x w x h): 11 x 3.5 x 0.5mm
    • Max. temperature: The maximum temperature depends on the material and shape of the actual sample.
      • Note: The installed thermocouple (K-Type) limits the maximum temperature to ~1300°C.
    • Material: Molybdenum, Al2O3
    • Both contact rails electrically isolated by Al2O3 washers
  • Air side cable included:
    • Cable length: 6m
    • Side A: 4-pin industry standard MS air side connector, two K-Type TC pairs
    • Side B:
      • K-Type (chromel/alumel) miniature thermocouple connector
      • 3x safety 4mm banana plugs (red, black & yellow)
  • Packaging included
  • Power Supply: Not included (Recommendation: Power 150W, Voltage Range: 0-50V, Current Range: 0-5A)
  • Controller: Not included
  • Tolerances:
    • Machined Parts:  ISO 2768-m-K

Downloads:  drawing (pdf)  /  3D model (stp)

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024