135.00 CHF

118.74 EUR *
134.15 USD *

375.00 CHF

329.84 EUR *
372.65 USD *

Adapter for Omicron Pincer Grip SA02-1862 (STM1)

Product code: ADOMO

Installed to the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original orthogonal pincer grip manufactured by Omicron.
REV: 23.5.2011 UM

175.00 CHF

153.93 EUR *
173.90 USD *

Adapter for Omicron PincerGrip GA02-1810/GA02-1119

Product code: ADOMO2

Installed to the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original orthogonal pincer grips GA02-1810/GA02-1119 manufactured by Omicron.
REV: 23.5.2011 UM

175.00 CHF

153.93 EUR *
173.90 USD *

Adapter for Omicron Straight Pincer Grip GA02-182

Product code: ADOMS

Installed on the WMG40 dual shaft wobblestick, this adapter allows the direct mounting of the original straight pincer grip manufactured by Omicron.
Pincer Grip Model: GA02-182
REV: 23.5.2011 UM

289.30 CHF

254.46 EUR *
287.49 USD *

LSA Adapterkit for Mounting on UHV Suitcase Support Structure

Product code: ADTSVSNLSA

Accessory to add/carry the LSA3.0 controller with your UHV suitcase

82.60 CHF

72.65 EUR *
82.08 USD *

Linear/Rotary Feedthrough Adapterplate for UHV Suitcase Support Rail

Product code: ADTSVSNMD

86.50 CHF

76.08 EUR *
85.96 USD *

Sample Transporter Adapterplate for UHV Suitcase Support Rail

Product code: ADTSVSNRM

Plate to support a sample transporter (like RM40, RMJ40, etc...) with the UHV suitcase support rail TSVSN.

711.00 CHF

625.38 EUR *
706.55 USD *

Wobblestick Adapterplate for UHV Suitcase Support Rail

Product code: ADTSVSNWM

Alignment +/-12mm for Wobblestick on NexGeneration UHV Suitcase VSN40S(V)

1'178.00 CHF

1'036.15 EUR *
1'170.63 USD *

Wobblestick Fine Alignment Adapterplate for UHV Suitcase Support Rail

Product code: ADTSVSNWMXY

Fine Alignment (max. +/-6.5mm) for Wobblestick on NexGeneration UHV Suitcase VSN40S(V)

130.00 CHF

114.35 EUR *
129.19 USD *

Adapter WM40 with D=5mm shaft from M3 to M4 internal thread

Product code: ADWMS5(M4I)

Simple part to change the thread size at the end of the shaft (OD=5mm) of a wobblestick manipulator.

Rev 29.04.2014 DS

130.00 CHF

114.35 EUR *
129.19 USD *

Adapter WM40 with D=7mm shaft from M4 to M3 internal thread

Product code: ADWMS7(M3I)

Simple part to change the thread size at the end of the shaft (OD=7mm) of a wobblestick manipulator.

Rev 29.04.2014 DS

165.00 CHF

145.13 EUR *
163.97 USD *

Adapter WM40 with D=7mm shaft from M4 to M6 internal thread

Product code: ADWMS7(M6I)

Simple part to change the thread size at the end of the shaft (OD=7mm) of a wobblestick manipulator.

Rev 29.04.2014 DS

on request

235.00 CHF

206.70 EUR *
233.53 USD *

CF - KF40 adapter, length 25mm

Product code: AFCF40KF40L25

Extra short CF/KF adapter.

Preparation system with docking station

Product code: BESSY-NMAG-PS

UHV Preparation system for Elmitec Photoelectron Emission Microscope delivered to Helmholtz Zentrum Berlin (BESSY) in 2007 and installed to SPEEM, Beamline UE49.

69.00 CHF

60.69 EUR *
68.57 USD *

Blank Flange DN100CF

Product code: BFCF100

Blank Flange DN100CF, stainless steel 304L, non rotatable, through hole

10.60 CHF

9.32 EUR *
10.53 USD *

Blank Flange DN16CF

Product code: BFCF16

Blank Flange DN16CF, stainless steel 304L, non rotatable, through hole

105.00 CHF

92.36 EUR *
104.34 USD *

Blank Flange DN160CF

Product code: BFCF160

Blank Flange DN160CF, stainless steel 304L, non rotatable, through hole

205.00 CHF

180.31 EUR *
203.72 USD *

Blank Flange DN200CF

Product code: BFCF200

Blank Flange DN200CF, stainless steel 304L, non rotatable, through hole

16.00 CHF

14.07 EUR *
15.90 USD *

Blank Flange DN40CF

Product code: BFCF40

Blank Flange DN40CF, stainless steel 304L, non rotatable, through hole

49.00 CHF

43.10 EUR *
48.69 USD *

Blank Flange DN63CF

Product code: BFCF63

Blank Flange DN63CF, stainless steel 304L, non rotatable, through hole

250.00 CHF

219.90 EUR *
248.43 USD *

Blank Flange for PHI Transfer Vessel Port

Product code: BFPHITV40

Blank Flange for PHI Transfer Vessel Port

245.00 CHF

215.50 EUR *
243.47 USD *

Heat Lamp with Fitting and 5m Cable

Product code: BKHELAMP250W

One heat lamp with ceramic fitting, mounting bracket, and 5m silicone cable.

295.00 CHF

259.48 EUR *
293.15 USD *

Bellows Protection for Wobblesticks

Product code: BP40

The BP40 enables angular movement of a wobblestick attached to flanges with tubes that have an inner diameter smaller than 40mm.

625.00 CHF

549.74 EUR *
621.09 USD *

Cable for heating wire connection on CTH40, 4m

Product code: CABCTH40HT4M

402.00 CHF

353.59 EUR *
399.48 USD *

MS-Cable for Evaporator, L=6m, Filament 1

Product code: CABEVFC(7MS6MF1)

EV40FC connector cable for filament 1

402.00 CHF

353.59 EUR *
399.48 USD *

MS-Cable for Evaporator, L=6m, Filament 2

Product code: CABEVFC(7MS6MF2)

EV40FC connector cable for filament 2

420.00 CHF

369.43 EUR *
417.37 USD *

Ion Pump original SAES HV Cable for NexTorr™ pumps, L=3m

Product code: CABIP3M

Ion pump high voltage cable, 3m length, for NexTorr™ combination pumps.

3'353.00 CHF

2'949.25 EUR *
3'332.01 USD *

CF 6-Way Cube 100

Product code: CB100

6-way cube DN100CF. Flanges tapped M8

849.00 CHF

746.77 EUR *
843.68 USD *

CF 6-Way Cube 16

Product code: CB16

6-way cube DN16CF. Flanges tapped M4

on request

CF 6-Way Cube 160

Product code: CB160

6-way cube DN160CF. Flanges tapped M8

1'440.00 CHF

1'266.60 EUR *
1'430.98 USD *

CF 6-Way Cube 40

Product code: CB40

6-way cube DN40CF. Flanges tapped M6

1'452.50 CHF

1'277.60 EUR *
1'443.41 USD *

CF 6-Way Cube 63

Product code: CB63

6-way cube DN63CF. Flanges tapped M8

3'182.00 CHF

2'798.84 EUR *
3'162.08 USD *

Liquid Nitrogen Dewar DN40CF with side port DN16CF

Product code: CRLND40

A double walled, vacuum isolated dewar with DN40CF flange and a DN16CF side port for an electrical feedthrouh. The cold plate is equipped with six tapped holes M3 for mounting in vacuum equipment.

4'743.00 CHF

4'171.87 EUR *
4'713.31 USD *

UHV Booster CF40 dewar version with heating coil and temperature sensor

Product code: CTDH40

LN2 cold trap for fast pump down dock. A double walled, vacuum isolated dewar filled with liquid nitrogen is used to cool a heat exchanger with a large surface area.

4'485.00 CHF

3'944.94 EUR *
4'456.92 USD *

UHV Booster CF40 flow through version with heating coil and temperature sensor

Product code: CTH40(WT)

Liquid nitrogen cold trap on a DN40CF flange as flow through version with heating coil and temperature sensor.

A working pressure in the 1E-8mbar range can be reached within much less than 1 hour.

44.00 CHF

38.70 EUR *
43.72 USD *

45.00 CHF

39.58 EUR *
44.72 USD *

37.00 CHF

32.54 EUR *
36.77 USD *

37.00 CHF

32.54 EUR *
36.77 USD *

37.00 CHF

32.54 EUR *
36.77 USD *

37.00 CHF

32.54 EUR *
36.77 USD *

45.00 CHF

39.58 EUR *
44.72 USD *

37.00 CHF

32.54 EUR *
36.77 USD *

37.00 CHF

32.54 EUR *
36.77 USD *

45.00 CHF

39.58 EUR *
44.72 USD *

3'920.00 CHF

3'447.97 EUR *
3'895.46 USD *

3'920.00 CHF

3'447.97 EUR *
3'895.46 USD *

5'920.00 CHF

5'207.14 EUR *
5'882.94 USD *

5'920.00 CHF

5'207.14 EUR *
5'882.94 USD *

1'865.00 CHF

1'640.43 EUR *
1'853.32 USD *

5'470.00 CHF

4'811.33 EUR *
5'435.75 USD *

8'340.00 CHF

7'335.74 EUR *
8'287.79 USD *

9'985.00 CHF

8'782.65 EUR *
9'922.49 USD *

59.00 CHF

51.90 EUR *
58.63 USD *

MS-Multipin Feedthrough 12kV DN16CF

Product code: EFCF16MS12

2, 4 or 7 pins, 7.5A per pin, pin diameter 1.27mm, air side connector included
 

MS-Multipin Feedthrough 700V DN16CF

Product code: EFCF16MS7

4, 6 or 10 pins, 10A per pin, pin diameter 1.42mm or 1.57mm, air side connector included.
 

995.00 CHF

875.19 EUR *
988.77 USD *

SMA feedthrough 18 GHz, 1 Pin, Double ended DN16CF

Product code: EFCFSMADN16CF

SMA Coaxial Feedthrough, 50 Ohm Matched Impedance to 18 GHz, 1 Pin, Grounded Shield, Double-Ended, 1.33" Conflat Flange

10'500.00 CHF

9'235.64 EUR *
10'434.26 USD *

Evaporation Source for Thin Film Deposition

Product code: EV40FC

Watercooled evaporation source for thin film deposition. Layer growth of various materials at operating pressures in the lower 10E-10 mbar range.
 

7'875.00 CHF

6'926.73 EUR *
7'825.70 USD *

Evaporation Source for Thin Film Deposition

Product code: EV40FC Special Offer

Special offer 25% discount
Watercooled evaporation source for thin film deposition. Layer growth of various materials at operating pressures in the lower 10E-10 mbar range.

1'700.00 CHF

1'495.29 EUR *
1'689.36 USD *

Filament Assembly Insert for EV40FC

Product code: EV40FCSK

Filament Assembly for EV40FC evaporator, completely mounted including: 4 tungsten filaments; 1 filament holder; 4 filament rods (Mo); 1 crucible mounting rod (W); 1 ceramic isolator (Macor); 1 shield for ceramic isolator (OFHC);
REV. 11.11.2010 UM

11'800.00 CHF

10'379.10 EUR *
11'726.13 USD *

5'879.00 CHF

5'171.08 EUR *
5'842.19 USD *

Vacuum Exsiccator (Desiccator), extrawide, 2 slots

Product code: EXSICA2W

Large size vacuum exsiccator (desiccator) cabinet with 2 slots to store larger items under vacuum or in a controlled atmosphere. Dimensions (W x H x D)= 683 x 322 x 337mm.
REV. 06.04.2013 UM

2'795.00 CHF

2'458.44 EUR *
2'777.50 USD *

Portable Vacuum Exsiccator

Product code: EXSICA3P

Portable, lightweighted, fully transparent vacuum desiccator cabinet with 3 slots.
Carry your samples under vacuum or in a controlled atmosphere.
Outside dimensions (W x H x D)= 265 x 206 x 212mm.
REV 06.04.2013 UM

3'050.00 CHF

2'682.73 EUR *
3'030.91 USD *

Vacuum Exsiccator (Desiccator) with 3 slots

Product code: EXSICA3S

Vacuum exsiccator (desiccator) cabinet with 3 slots to store sensitive items under vacuum or in a controlled atmosphere. Dimensions (W x H x D)= 498 x 294 x 302mm. Designed by Paul Scherrer Institute, 5232 Villigen PSI, Switzerland
REV 06.04.2013 UM

see pricelist below

Fasteners

Product code: FASTENERS, TITANIUM / MOLYBDENUM

Fasteners, titanium/molybdenum

1'150.00 CHF

1'011.52 EUR *
1'142.80 USD *

Tungsten Crucible for the Thin Film Deposition Evaporation

Product code: FCR(W)

The Tungsten crucible for the EV40-FC evaporator is ideal for the evaporation of metals like Ni, Co, Fe, Au, Ag and Cu.
REV 30.05.2013 UM

390.00 CHF

343.04 EUR *
387.56 USD *

Straight Fork for Block Style Holders

Product code: FRKBS

Straight fork for SHBS sample holders 5x12x19.5mm or SHBS(5) 5x5x19.5mm. Pin separation distance = 12mm, Pin diameter = 1.6mm
REV 23.5.2011 UM

340.00 CHF

299.06 EUR *
337.87 USD *

Short Fork for Block Style Holders

Product code: FRKBSDM

Short fork without shaft for SHBS sample holders 5x12x19.5mm or SHBS(5) 5x5x19.5mm. Pin separation distance = 12mm, Pin diameter = 1.6mm. M4 screw for direct installation.
REV 23.5.2011 UM

2'630.00 CHF

2'313.31 EUR *
2'613.53 USD *

Wafer Lifting Device

Product code: FRKLIFT

A device for magnetically driven dual shaft sample transporters to elevate and handle wafers.
REV. 1.6.2011 UM

on request

4'965.00 CHF

4'367.14 EUR *
4'933.92 USD *

3'985.00 CHF

3'505.15 EUR *
3'960.05 USD *

Sample Transporter DN40CF

Product code: GMD40-XXXX-YYYY

Magnetically driven sample transporter with mounting flange DN40CF. Linear- and rotary motion.

• XXXX: linear travel in millimeters
• YYYY: retracted length, flange face to end of shaft in millimeters (min. 10mm)

REV: 24.06.2014 UM

988.00 CHF

869.03 EUR *
981.81 USD *

988.00 CHF

869.03 EUR *
981.81 USD *

104.00 CHF

91.48 EUR *
103.35 USD *

Heating Cable with Stainless Steel Protective Braid 1m, 100W, 230V

Product code: HEAHSS100W

Flexible heating cord with nickel protective braid. For temperatures up to 450°C.

119.00 CHF

104.67 EUR *
118.25 USD *

Heating Cable with Stainless Steel Protective Braid 1.5m, 150W, 230V

Product code: HEAHSS150W

Flexible heating cord with nickel protective braid. For temperatures up to 450°C.

185.00 CHF

162.72 EUR *
183.84 USD *

Heating Cable with Stainless Steel Protective Braid 2m, 200W, 230V

Product code: HEAHSS200W

Flexible heating cord with nickel protective braid. For temperatures up to 450°C.

134.00 CHF

117.86 EUR *
133.16 USD *

Heating Cable with Stainless Steel Protective Braid 2m, 250W, 230V

Product code: HEAHSS250W

Flexible heating cord with nickel protective braid. For temperatures up to 450°C.

152.00 CHF

133.70 EUR *
151.05 USD *

Heating Cable with Stainless Steel Protective Braid 3m, 350W, 230V

Product code: HEAHSS350W

Flexible heating cord with nickel protective braid. For temperatures up to 450°C.

180.00 CHF

158.33 EUR *
178.87 USD *

Heating Cable with Stainless Steel Protective Braid 4m, 500W, 230V

Product code: HEAHSS500W

Flexible heating cord with nickel protective braid. For temperatures up to 450°C.

295.00 CHF

259.48 EUR *
293.15 USD *

Hex Key for Wobblestick

Product code: HEXKEY-M-XXXX

This key can be used in combination with WM40/WMWA40 wobblesticks for tightening/loosening in-vacuum hexagonal socket screws.
Available in both, metric and imperial type hex keys. Please specify key type and size upon ordering.
REV 23.5.2011 UM

295.00 CHF

259.48 EUR *
293.15 USD *

Hex Nut for Wobblestick

Product code: HEXNUT-XXXX

Turns you wobblestick into an allen wrench. Used in combination with WM40/WMWA40 wobblesticks for tightening/loosening in-vacuum hexagonal head screws.
Available in both, metric and imperial sizes. Please specify nut type and size upon ordering.
REV 23.5.2011 UM

9'800.00 CHF

8'619.93 EUR *
9'738.65 USD *

9'877.00 CHF

8'687.66 EUR *
9'815.16 USD *

on request

Preparation Station for STM Tips

Product code: HSASM40-TIPEBFE2-MD16(TS)-ESFC

HSASM40-TIPEBFE2-MD16(TS)-ESFC is a tip preparation stage for STM-tips. The stage has a filament for tip annealing and a spherical electrode for a quality check of the annealed tips. The measured field emission current and voltage indicates the quality of the tip.

5'985.00 CHF

5'264.32 EUR *
5'947.53 USD *

PBN Heater Assembly with Receiver for Flag Style Plates

Product code: HSOMPBN50

A 50W pyrolitic boron nitride heater in combination with a molybdenum receiver for flag style plates provides a reliable solution for sample annealing. A K-type thermocouple is mounted on the sample receiver.

on request

17.50 CHF

15.39 EUR *
17.39 USD *

Miniature cable AWG 36, OD=0.3mm, PFA jacket, black, 1 meter

Product code: IVLPFACU03

UHV compatible miniature cable AWG 36. OD=0.3mm, PFA-Jacket. Conductor material: Silver plated copper, stranding = 7x0.05mm, crossectional area 0.014mm2. Price per 1 meter. Discounts may apply for larger quantities.

on request

In Vacuum Tube Support for MZ Manipulators CF64

Product code: IVTSMZ63-XXXX

18.30 CHF

16.10 EUR *
18.19 USD *

Crimp and push connector for Pin D=1.0mm, 10/PK

Product code: IVWCPC10PK10

In vacuum crimp and push connector for SUB-D feed-throughs, pin-diameter 1.0mm
pack of 10
 

70.00 CHF

61.57 EUR *
69.56 USD *

Crimp and Push Connector for Pin D=1.7mm, 10/PK

Product code: IVWCPC17PK10

In vacuum crimp and push connector for MS-Type feedthroughs, pin-diameter 1.7mm
pack of 10
 

Crimp and Push Connector for Pin D=1.4mm, 5/PK

Product code: IVWCPCO14PK5

In vacuum crimp and push connector for electrical feed-throughs with pin diameter 1.4mm
pack of 5

25.00 CHF

21.99 EUR *
24.84 USD *

Crimp and Push Pin D=1.0mm, 10/PK

Product code: IVWCPP10PK10

In vacuum crimp and push pin for SUB-D feed-throughs, pin-diameter 1.0mm
pack of 10
 

on request

13 Pin Spring Probe Connector

Product code: IVWSC13

Miniaturized 13-Pin spring probe connector for use in UHV. Spring probe pins provide a reliable electrical contact.

19.50 CHF

17.15 EUR *
19.38 USD *

Spring Probe Contact, 0.5mm OD

Product code: IVWSC2

Miniaturized high precision spring probe contact.
Relaxed length: 3.3mm, diameter 0.5mm

 

1'325.00 CHF

1'165.45 EUR *
1'316.70 USD *

Spring Probe Contact, 0.5mm OD pack of 100

Product code: IVWSC2PK100

Miniaturized high precision spring probe contact.
Relaxed length: 3.3mm, diameter 0.5mm

 

2'860.00 CHF

2'515.61 EUR *
2'842.09 USD *

Load Lock Chamber

Product code: KS100

Load lock chamber with removable O-ring sealed quick access door.
Transfer flange DN100CF, 3 additional ports DN40CF, 1 port DN16CF.
REV. 28.4.2011 UM

4'940.00 CHF

4'345.15 EUR *
4'909.07 USD *

Fast Entry Load Lock

Product code: KS100-MD16-TSMD

Load lock chamber with O-ring sealed quick access door and MD16 linear/rotary feedthrough, transfer flange DN100CF, 3 additional ports DN40CF.
REV 28.4.2011 UM

3'120.00 CHF

2'744.30 EUR *
3'100.47 USD *

Load Lock Chamber with removable door

Product code: KS100(RD)

Load lock chamber with removable O-ring sealed quick access door.
Transfer flange DN100CF, 3 additional ports DN40CF, 1 port DN16CF.

REV. 06.07.2010 MN

5'005.00 CHF

4'402.32 EUR *
4'973.67 USD *

Fast Entry Lock

Product code: KS100(RD)-MD16-TSMD-XXXX-YYYY

Load lock chamber with removable O-ring sealed quick access door, MD16 linear/rotary feedthrough, transfer flange DN100CF, 3 additional ports DN40CF. 06.07.2010 MN

2'535.00 CHF

2'229.75 EUR *
2'519.13 USD *

Fast Entry Load Lock

Product code: KS40

Load lock chamber with O-ring sealed quick access door.
Transfer flange DN40CF, 3 additional ports DN40CF, 1 port DN16CF.
REV 28.4.2011 UM

4'660.00 CHF

4'098.87 EUR *
4'630.83 USD *

Fast Entry Load Lock

Product code: KS40-MD16-TSMD

Load lock chamber with O-ring sealed quick access door and MD16 linear/rotary feedthrough, transfer flange DN40CF, 3 additional ports DN40CF.
REV 28.4.2011 UM

2'665.00 CHF

2'344.09 EUR *
2'648.32 USD *

Fast Entry Load Lock

Product code: KS63

Load lock chamber with O-ring sealed quick access door.
Transfer flange DN63CF, 3 additional ports DN40CF, 1 port DN16CF.
REV 27.4.2011 UM

4'760.00 CHF

4'186.82 EUR *
4'730.20 USD *

Fast Entry Load Lock

Product code: KS63-MD16-TSMD

Load lock chamber with O-ring sealed quick access door and MD16 linear/rotary feedthrough with tube support, transfer flange DN63CF, 3 additional ports DN40CF.
REV 04.06.2013 UM

2'665.00 CHF

2'344.09 EUR *
2'648.32 USD *

Fast Entry Load Lock

Product code: KSTL40-63

Load lock chamber with O-ring sealed quick access door,top or side loading version.
Transfer flange DN40CF, 2 additional ports DN40CF, 1 port DN16CF, pumping port DN63CF.
REV 28.4.2011 UM

2'350.00 CHF

2'067.02 EUR *
2'335.29 USD *

495.00 CHF

435.39 EUR *
491.90 USD *

Lock ring with quick fastener

Product code: LRBR

Quick fastening lock ring for RM and GM sample transporters with 40mm OD. tubes.

126.00 CHF

110.83 EUR *
125.21 USD *

Lock ring tube support bracket S

Product code: LRRMTSBS

Lock ring tube support bracket S
20130502 DvG

2'975.00 CHF

2'616.76 EUR *
2'956.37 USD *

Battery Powered Ion Pump Controller V3 R0

Product code: LSA3.0

Battery Operated High Voltage Controller for UHV-Suitcase VSN40S and Ion Pumps.

5 kV positive output voltage. Pressure display and optional temperature measurement for Cryo version of VSN40S.

on request

Controller for NEG activation of NexTorr™ D-100-5 and D-200-5 pumps

Product code: LSN1.0

Power controller for the activation of Non Evaporable Getters. Drives NEG-elements of NexTorr™ D-100-5 and D-200-5 pump models.

1'825.00 CHF

1'605.24 EUR *
1'813.57 USD *

Customized Length Linear/Rotary Feedthrough DN16CF

Product code: MD16-XXXX-YYYY

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 15mm)

REV 02.11.2016 JB
 

1'525.00 CHF

1'341.37 EUR *
1'515.45 USD *

Linear/Rotary Feedthrough DN16CF

Product code: MD16-0100-0030

Magnetically driven linear/rotary feedthrough with mounting flange DN16CF. Linear travel: 100mm, continuous rotation. Typical lead time: 1-2 weeks. REV 22.09.2014 JK.
 

1'575.00 CHF

1'385.35 EUR *
1'565.14 USD *

Linear/Rotary Feedthrough DN16CF

Product code: MD16-0200-0030

Magnetically driven linear/rotary feedthrough with mounting flange DN16CF. Linear travel: 200mm, continuous rotation. Typical lead time: 1-2 weeks. REV 22.09.2014 JK.
 

1'625.00 CHF

1'429.33 EUR *
1'614.83 USD *

Linear/Rotary Feedthrough DN16CF

Product code: MD16-0300-0030

Magnetically driven linear/rotary feedthrough with mounting flange DN16CF. Linear travel: 300mm, continuous rotation. Typical lead time: 1-2 weeks. REV 22.09.2014 JK.
 

1'675.00 CHF

1'473.30 EUR *
1'664.51 USD *

Linear/Rotary Feedthrough DN16CF

Product code: MD16-0400-0030

Magnetically driven linear/rotary feedthrough with mounting flange DN16CF. Linear travel: 400mm, continuous rotation. Typical lead time: 1-2 weeks. REV 22.09.2014 JK.
 

4'300.00 CHF

3'782.21 EUR *
4'273.08 USD *

High Precision Linear/Rotary Manipulator

Product code: MD16-ADCF16TS-DRVMD

DN16CF linear/rotary manipulator with high precision drive

2'020.00 CHF

1'776.76 EUR *
2'007.35 USD *

Customized Length Linear/Rotary Feedthrough DN40CF

Product code: MD40-XXXX-YYYY

Magnetically driven single shaft linear/rotary feedthrough with mounting flange DN40CF.

XXXX: linear travel in millimeters (min 50mm, max 500mm)
YYYY: retracted length, flange face to end of shaft in millimeters (min 11.8mm, max 200mm), REV 22.09.2014 JK

1'710.00 CHF

1'504.09 EUR *
1'699.29 USD *

Linear/Rotary Feedthrough DN40CF

Product code: MD40-0100-0030

Magnetically driven single shaft linear/rotary feedthrough with mounting flange DN40CF. Linear travel 100mm, retracted shaft length 30mm, continuously rotatable. Typical lead time: 1-2 weeks. REV 22.09.2014 JK

1'750.00 CHF

1'539.27 EUR *
1'739.04 USD *

Linear/Rotary Feedthrough DN40CF

Product code: MD40-0200-0030

Magnetically driven single shaft linear/rotary feedthrough with mounting flange DN40CF. Linear travel 200mm, retracted shaft length 30mm, continuously rotatable. Typical lead time: 1-2 weeks. REV 22.09.2014 JK

9'322.00 CHF

8'199.49 EUR *
9'263.64 USD *

Motorized Linear and Rotary Manipulator DN40CF with Sample Storage Stack

Product code: MD40-0200-0030-DRVMDMOTLR-RECOMSTACK(03H00S02H04S)H

Configuration example of a 2-axis motorized precision drive unit equipped linear/rotary feedthrough with attached sample storage stack for flag style sample plates. The motorized drive unit provides automatic and reproducible extension and rotation of the shaft.

1'790.00 CHF

1'574.46 EUR *
1'778.79 USD *

Linear/Rotary Feedthrough DN40CF

Product code: MD40-0300-0030

Magnetically driven single shaft linear/rotary feedthrough with mounting flange DN40CF. Linear travel 300mm, retracted shaft length 30mm, continuously rotatable. Typical lead time: 1-2 weeks. REV 22.09.2014 JK

1'830.00 CHF

1'609.64 EUR *
1'818.54 USD *

Linear/Rotary Feedthrough DN40CF

Product code: MD40-0400-0030

Magnetically driven single shaft linear/rotary feedthrough with mounting flange DN40CF. Linear travel 400mm, retracted shaft length 30mm, continuously rotatable. Typical lead time: 1-2 weeks. REV 22.09.2014 JK

5'940.00 CHF

5'224.73 EUR *
5'902.81 USD *

Motorized Linear/Manual Rotary Manipulator DN40CF

Product code: MD40-DRVMDMOTL-XXXX-YYYY

Motorized DN40CF linear/rotary feedthrough with precision spindle drive, for automatic and reproducible extension of the shaft. Rotary motion is done manually.

7'940.00 CHF

6'983.90 EUR *
7'890.29 USD *

Motorized Linear and Rotary Manipulator DN40CF

Product code: MD40-DRVMDMOTLR-XXXX-YYYY

Motorized DN40CF linear/rotary manipulator with precision spindle drive, for automatic and reproducible extension and rotation of the shaft.

2'185.00 CHF

1'921.89 EUR *
2'171.32 USD *

Linear/Rotary Feedthrough with Angle Limit

Product code: MD40(RL)-XXXX-YYYY-ZZZZ

Magnetically driven single shaft linear/ rotary feedthrough with mounting flange DN40CF and rotation lock.
Please select your prefered tube support necessary for rotation lock. REV 24.09.2014 JK

2'350.00 CHF

2'067.02 EUR *
2'335.29 USD *

3'005.00 CHF

2'643.15 EUR *
2'986.19 USD *

High torque Linear/Rotary Feedthrough

Product code: MD40HT-XXXX-YYYY

Magnetically driven single shaft linear/ rotary feedthrough with mounting flange DN40CF.

REV 28.10.16 JB

4'465.00 CHF

3'927.35 EUR *
4'437.05 USD *

Dual Shaft Linear/Rotary Feedthrough

Product code: MDG40-XXXX-YYYY

Magnetically driven dual shaft linear/ rotary feedthrough with mounting flange DN40CF.
REV: 02.12.2010 DvG

4'625.00 CHF

4'068.08 EUR *
4'596.04 USD *

Dual Shaft Linear/Rotary Feedthrough DN40CF with Rotation Lock

Product code: MDG40(RL)-XXXX-YYYY

Magnetically driven dual shaft linear/ rotary feedthrough with mounting flange DN40CF and rotation lock.
Please select your prefered tube support necessary for rotation lock.
REV: 02.12.2010 DvG

on request

Magnetic coupling with rotation stop

Product code: MKRMDGRS

The presented magnetic coupling limits rotational motion and is made for dual shaft sample transporters of the type RMDG40.

REV 22.04.2014 DS

445.00 CHF

391.42 EUR *
442.21 USD *

Stepper Motor Kit, NEM14 and max. 0.23Nm Torque

Product code: MOTN14T0.23-XXXX

Motorization Kit for one axis of Boomerax-Series XYZ Manipulators. Stepper Motor 3Nm with 1.8° step resolution.
 

on request

Stepper Motor Kit for one Axis, NEM17 and max. 0.7Nm Torque

Product code: MOTN17T0.7-XXXX

Motorization Kit for one axis of Boomerax-Series XYZ Manipulators. Stepper Motor 0.7Nm with 1.8° step resolution.
 

745.00 CHF

655.29 EUR *
740.34 USD *

Stepper Motor Kit, NEM23 and max. 1.9Nm Torque

Product code: MOTN23T1.9-XXXX

Motorization Kit for one axis of Boomerax-Series XYZ Manipulators. Stepper Motor 1.9Nm with 1.8° step resolution.
 

745.00 CHF

655.29 EUR *
740.34 USD *

Stepper Motor Kit, NEM24 and max. 3Nm Torque

Product code: MOTN24T3-XXXX

Motorization Kit for one axis of Boomerax-Series XYZ Manipulators. Stepper Motor 3Nm with 1.8° step resolution.
 

3'625.00 CHF

3'188.50 EUR *
3'602.31 USD *

Single Axis X-Translator, +/-3 mm travel

Product code: MX16TX3

Miniature Single Axis X-Translator with mounting flange DN16CF. X-travel +/-3mm travel. Free bore diameter 16mm.

3'680.00 CHF

3'236.87 EUR *
3'656.96 USD *

Single Axis X-Translator, +/-3 mm travel, Micrometer centrally located

Product code: MX16TX3C

Miniature Single Axis X-Translator with mounting flange DN16CF. X-travel +/-3mm travel. Free bore diameter 16mm. Micrometer located centrally on main block.

7'800.00 CHF

6'860.76 EUR *
7'751.17 USD *

Boomerax XY Stage NW100 with +-12.5mm travel

Product code: MXY100CF100TCF63TXY12

Boomerax high precision XY stage with +-12.5mm XY travel and bellows ID=100mm. Standard base flange DN100CF tapped metric M8. Standard top flange DN63CF tapped metric M8. Other flange sizes/types on request. Options include motorization, encoders and constant force compensation springs for vertical loads. Boomerax - returns precisely. Always.

8'350.00 CHF

7'344.53 EUR *
8'297.72 USD *

Boomerax XY Stage NW100 with +-25mm travel

Product code: MXY100CF100TCF63TXY25

Boomerax high precision XY stage with +-25mm XY travel and bellows ID=100mm. Standard base flange DN100CF tapped metric M8. Standard top flange DN63CF tapped metric M8. Other flange sizes/types on request. Options include motorization, encoders and constant force compensation springs for vertical loads. Boomerax - returns precisely. Always.

5'650.00 CHF

4'969.65 EUR *
5'614.63 USD *

Boomerax XY Stage NW40 with +-10mm travel

Product code: MXY40CF40TCF40TXY10

Boomerax high precision XY stage with +-10mm XY travel and bellows ID=38mm. Standard base and top flange DN40CF tapped metric M6. Options include motorization, encoders and constant force compensation springs for vertical loads. Boomerax - returns precisely. Always.

6'750.00 CHF

5'937.20 EUR *
6'707.74 USD *

Boomerax XY Stage NW63 with +-12.5mm travel

Product code: MXY63CF63TCF40TXY12

Boomerax high precision XY stage with +-12.5mm XY travel and bellows ID=63mm. Standard base flange DN63CF tapped metric M8. Standard top flange DN40CF tapped metric M6. Other flange sizes/types on request. Options include motorization, encoders and constant force compensation springs for vertical loads. Boomerax - returns precisely. Always.

on request

Linear Z-Drive DN160CF

Product code: MZ160

Bellows sealed linear translator DN160CF. Free bore 150mm. Z-travel ranges 200, 300, 400, 500 and 600mm.

6'853.40 CHF

6'028.15 EUR *
6'810.49 USD *

Manual Linear Z-Drive with two fixed, outline DN40CF

Product code: MZ40CF40CF40-0100

Boomerax series Z-axis drive with edge welded bellows
Z-travel range 100mm
Free bore 38mm

on request

Manual Linear Z-Drive with two fixed, outline DN40CF

Product code: MZ40CF40CF40-0200

Boomerax series Z-axis drive with edge welded bellows
Z-travel range 200mm
Free bore 38mm

7'800.00 CHF

6'860.76 EUR *
7'751.17 USD *

Manual Linear Z-Drive with two fixed, outline DN63CF

Product code: MZ63CF63CF63-0100

Boomerax series Z-axis drive with edge welded bellows
Z-travel range 100mm
Free bore 65mm

on request

Manual Linear Z-Drive with two fixed, outline DN63CF

Product code: MZ63CF63CF63-0200

Boomerax series Z-axis drive with edge welded bellows
Z-travel range 200mm
Free bore 65mm

8'546.00 CHF

7'516.93 EUR *
8'492.50 USD *

Manual Linear Z-Drive with two fixed, outline DN63CF

Product code: MZ63CF63CF63-0300

Boomerax series Z-axis drive with edge welded bellows
Z-travel range 300mm
Free bore 65mm

9'659.50 CHF

8'496.35 EUR *
9'599.03 USD *

Manual Linear Z-Drive with two fixed, outline DN63CF

Product code: MZ63CF63CF63-0500

Boomerax series Z-axis drive with edge welded bellows
Z-travel range 500mm
Free bore 65mm

on request

Manual Linear Z-Drive with two fixed, outline DN63CF

Product code: MZ63CF63CF63-0750

Boomerax series Z-axis drive with edge welded bellows
Z-travel range 750mm
Free bore 65mm

on request

Manual Linear Z-Drive with two fixed, outline DN63CF

Product code: MZ63CF63CF63-1000

Boomerax series Z-axis drive with edge welded bellows
Z-travel range 1000mm
Free bore 65mm

1'615.00 CHF

1'420.53 EUR *
1'604.89 USD *

Chamber for Electrical Feedthroughs of BOOMERAX Manipulators

Product code: MZFCHCF63CF40T5XCF16T

Compact mounting chamber for electrical feedthroughs on XYZ manipulators. CF63 and CF40-Tapped mounting flanges, 5xDN16CF tapped flanges for electrical feedthroughs. The base flange provides threaded ring segments for mounting the manipulators support tube.

1'595.00 CHF

1'402.94 EUR *
1'585.01 USD *

Chamber for Electrical Feedthroughs of BOOMERAX Manipulators

Product code: MZFCHCF63CF40T5XCF16T30DEG

Compact mounting chamber for electrical feedthroughs on XYZ manipulators. CF63 and CF40-Tapped mounting flanges, 5xDN16CF tapped flanges for electrical feedthroughs. The base flange provides threaded ring segments for mounting the manipulators support tube.

1'455.00 CHF

1'279.80 EUR *
1'445.89 USD *

Chamber for Electrical Feedthroughs of BOOMERAX Manipulators

Product code: MZFCHCF63CF40T5XCF16TH55

Extra compact mounting chamber for electrical feedthroughs on XYZ manipulators. CF63 and CF40-Tapped mounting flanges, 5xDN16CF tapped flanges for electrical feedthroughs. The base flange provides threaded ring segments for mounting the manipulators support tube.

1'450.00 CHF

1'275.40 EUR *
1'440.92 USD *

Chamber for Electrical Feedthroughs of BOOMERAX Manipulators

Product code: MZFCHCF63CF635XCF16T

Compact mounting chamber for electrical feedthroughs on XYZ manipulators. CF63 mounting flanges, 5xDN16CF tapped flanges for electrical feedthroughs. The base flange provides threaded ring segments for mounting the manipulators support tube.

1'495.00 CHF

1'314.98 EUR *
1'485.64 USD *

Chamber for Electrical Feedthroughs of BOOMERAX Manipulators

Product code: MZFCHCF63TCF63T5XCF16T

Compact mounting chamber for electrical feedthroughs on XYZ manipulators. CF63 tapped mounting flanges, 5xDN16CF tapped flanges for electrical feedthroughs. The base flange provides threaded ring segments for mounting the manipulators support tube.

1'675.00 CHF

1'473.30 EUR *
1'664.51 USD *

Chamber for Electrical Feedthroughs of BOOMERAX Manipulators

Product code: MZFDSCF63T5XCF16T

Compact mounting chamber for electrical feedthroughs on XYZ manipulators. CF63-Tapped double-sided flange, 5xDN16CF tapped flanges for electrical feedthroughs.

685.00 CHF

602.52 EUR *
680.71 USD *

Limit Switch Kit for Boomerax Z-Shift Manipulators

Product code: MZLIMELKIT

Electrical limit switches for Z-shift Manipulator. Positions adjustable. Fully bakeable up to 150°C

on request

Weight Support for MZ Manipulators 147N Version (eff. 165N-290N)

Product code: MZS147-XXXX-YYYY

For horizontal mounted XYZ-stages

on request

Weight Support for MZ Manipulators 74N Version (eff. 81N-156N)

Product code: MZS74-XXXX-YYYY

For horizontal mounted XYZ-stages

2'770.00 CHF

2'436.45 EUR *
2'752.66 USD *

Port Aligner DN100CF

Product code: PA100

Port aligner DN100CF (6''), L=100 +/-5mm, free bore 104mm.
REV: 26.06.2014DS

3'340.00 CHF

2'937.81 EUR *
3'319.09 USD *

Hexapod Port Aligner DN100CF angular and lateral displacement

Product code: PA100HEX

Hexapod Port aligner DN100CF (6" OD), L=120 +/-5mm, free bore 102mm (if centered). Hexapod port aligners are especially sturdy and allow the adjustment of a lateral and angular displacement
17.01.2014 UM

995.00 CHF

875.19 EUR *
988.77 USD *

Port Aligner DN16CF

Product code: PA16

Port aligner DN16CF (1.33" OD), L=51mm +/-6mm, free bore 16mm.

on request

Compact Port Aligner DN160CF

Product code: PA160E(CB127)

Compact port aligner DN160CF (8" OD), L=95 +/-5mm, clear bore 127mm.

4'864.00 CHF

4'278.30 EUR *
4'833.55 USD *

Port Aligner DN160CF with Gas pressure spring

Product code: PA160GS

Gas pressure spring supported Port aligner DN160CF L=210mm with free inner diameter 150mm and +/-35mm lateral deflection. A device for the alignment of UHV equipment.

on request

Compact Port Aligner DN200CF

Product code: PA200E(R1)

Compact port aligner DN200CF (10" OD), L=100 +/-5mm, free bore 200mm.
REV: 26.03.2014DS

1'390.00 CHF

1'222.62 EUR *
1'381.30 USD *

Port Aligner DN40CF, both flanges tapped M6

Product code: PA40EC

Ultra compact port aligner DN40CF (2.75" OD), L=53mm +4mm/-11.3mm, free bore 38mm.
REV: 15.01.2014 UM

1'450.00 CHF

1'275.40 EUR *
1'440.92 USD *

Hexapod Port Aligner DN40CF for angular and lateral displacement

Product code: PA40HEX

Hexapod Port aligner DN40CF (2.75" OD), L=90 +/-5mm, free inner diameter 38mm (if centered). Hexapod port aligners are especially sturdy and allow for adjustment of lateral as well as angular displacement.
REV 15.01.2014 UM

885.00 CHF

778.43 EUR *
879.46 USD *

Port Aligner DN40CF

Product code: PA40W

Port aligner DN40CF (2.75" OD), L=90 +/-5mm, free bore 38mm

1'630.00 CHF

1'433.72 EUR *
1'619.80 USD *

Port Aligner DN63CF

Product code: PA63

Port aligner DN63CF (4.5" OD), L=100 +/-5mm, free bore 65mm.
REV: 15.01.2014 UM

1'950.00 CHF

1'715.19 EUR *
1'937.79 USD *

Compact Port Aligner DN63CF

Product code: PA63E

Compact port aligner DN63CF (4.5" OD), L=75 +/-5mm, free bore 65mm.
REV: 15.01.2014 UM

2'140.00 CHF

1'882.31 EUR *
2'126.60 USD *

Hexapod Port Aligner DN63CF for angular and lateral displacement

Product code: PA63HEX

Hexapod Port aligner DN63CF (4.5" OD), L=110 +/-5mm, free bore 65mm (if centered). Hexapod port aligners are especially sturdy and allow for adjustment of a lateral and angular displacement
15.01.2014 UM

on request

Customer specific precision parts

Product code: PCM(CS)

We provide Swiss precision mechanical parts in accordance with your drawings, 3D models or instructions.

on request

Straight Pincer High Force Version for Wafer

Product code: PGHFWMWAF

Pincer for Wafer

1'950.00 CHF

1'715.19 EUR *
1'937.79 USD *

Hard Grip Straight Pincer RM for SHOM Sample Plate

Product code: PGRMS(OMH)

Intended to pick up SHOM sample plates and move them with a transfer rod over larger distances typically from one UHV-chamber to another. For linear transfer motion and for all sample transporters, we recommend the PGRMS(OMH)-version: The sample plates are held with a clearance of +/-2° horizontal and vertical

REV: 07.09.16 JB

2'550.00 CHF

2'242.94 EUR *
2'534.04 USD *

Straight Pincer RM for SHOM plates and swiss stubs

Product code: PGRMS(SWOMH)

Intended to pick up SHOM sample plates and move them with a transfer rod over larger distances typically from one UHV-chamber to another. For linear transfer motion and for all sample transporters, we recommend the PGRMS(OMH)-version: The sample plates are held with a clearance of +/-2° horizontal and vertical

REV: 07.09.16 JB

3'850.00 CHF

3'386.40 EUR *
3'825.90 USD *

Straight Pincer for Wafer Handling

Product code: PGRMWAF

Pincer for Wafer handling

2'315.00 CHF

2'036.24 EUR *
2'300.51 USD *

Orthogonal Pincer for SHOM Flag Style Plates

Product code: PGWMO(OM)

Standard clearance, sample play of +/-8°.
REV: 12.08.2014 UM

0.00 CHF

0.00 EUR *
0.00 USD *

Parallel Pincer with Isolated Jaws

Product code: PGWMP(DC)

Electrically isolated jaws for DC-heating, sample bias or current measurement.
REV 12.08.2014 UM

2'990.00 CHF

2'629.96 EUR *
2'971.28 USD *

Parallel Pincer for SHOM Flag Style Plates

Product code: PGWMP(OM)

"UHV-Tweezers" for extremely delicate manipulations. Standard clearance, sample play of +/-8°
REV 19.10.16 JB

2'990.00 CHF

2'629.96 EUR *
2'971.28 USD *

Hard Grip Parallel Pincer for SHOM Plates

Product code: PGWMP(OMH)

"UHV-Tweezers" for extremely delicate manipulations. Reduced clearance, sample play of +/-2°. Recommended for MDG40 linear-/rotary feedthroughs.
REV 19.10.2016 JB

on request

Customized Straight Pincer

Product code: PGWMS

Base model for application specific machining of the jaws.
REV 2014 UM

1'430.00 CHF

1'257.81 EUR *
1'421.05 USD *

Straight Pincer for SHOM Flag Style Plate

Product code: PGWMS(OM)

Standard clearance, sample play of +/-8°.

1'430.00 CHF

1'257.81 EUR *
1'421.05 USD *

Hard Grip Straight Pincer for SHOM Flag Style Plates

Product code: PGWMS(OMH)

Reduced clearance, play of +/-2°. Optimized for firm grip. Recommended for MDG40 linear-/rotary feedthroughs.
 

1'920.00 CHF

1'688.80 EUR *
1'907.98 USD *

Straight Pincer Ultra SLIM LT AFM for SHOM

Product code: PGWMS(OMUSLIMLTA)

Straight pincer grip with especially narrow head and ultra slim jaws, customized for use with Omicron UHV LT-SPM.
 

1'896.00 CHF

1'667.69 EUR *
1'884.13 USD *

3'950.00 CHF

3'474.36 EUR *
3'925.27 USD *

3'950.00 CHF

3'474.36 EUR *
3'925.27 USD *

1'560.00 CHF

1'372.15 EUR *
1'550.23 USD *

Long Straight Pincer for SHOM Flag Style Plates

Product code: PGWMSL(OM)

Longer version, standard clarance, sample play of +/-8°

1'560.00 CHF

1'372.15 EUR *
1'550.23 USD *

Hard Grip Long Straight Pincer for SHOM Flag Style Plates

Product code: PGWMSL(OMH)

Longer version, reduced clearance, play of +/-2°. Optimized for firm grip. Recommended for MDG40 linear-/rotary feedthroughs.
 

345.00 CHF

303.46 EUR *
342.84 USD *

Parking Lock MD

Product code: PLMD

The Parking Lock MD helps to find the right turn position before the Sample holder reaches the parkting position at a Linear/Rotary Feedthrough.

150.65 CHF

132.51 EUR *
149.71 USD *

Parking Lock on RM Sampletransporters

Product code: PLRM

The Parking Lock helps to find the right turn position before the Sample holder reaches the parkting position.

130.00 CHF

114.35 EUR *
129.19 USD *

Parking Lock for Wobblesticks on VSN40S UHV Suitcases with Alignment/Protection Rails

Product code: PLWM

This parking lock defines the correct position of the transfer arm when the sample holder reaches the retracted parking position.

UHV Sample Preparation System

Product code: PSI-X11MA-PS

UHV Preparation system for Elmitec Photoelectron Emission Microscope delivered to Paul Scherrer Institute (SLS) in 2004 and installed to PEEM, Beamline SIM-X11MA.

1'985.00 CHF

1'745.98 EUR *
1'972.57 USD *

1'720.00 CHF

1'512.89 EUR *
1'709.23 USD *

3'760.00 CHF

3'307.24 EUR *
3'736.46 USD *

1'320.00 CHF

1'161.05 EUR *
1'311.74 USD *

Rotary Feedthrough DN16CF (0.5 Nm)

Product code: RD16-0035

Continuous rotation, mounting flange DN16CF.

1'560.00 CHF

1'372.15 EUR *
1'550.23 USD *

Rotary Feedthrough DN16CF with high torque magnet (1 Nm)

Product code: RD16HT-0035

Continuous rotation, mounting flange DN16CF, 1Nm high-torque version.
Rev: 19.06.2013DS

1'795.00 CHF

1'578.85 EUR *
1'783.76 USD *

Rotary Feedthrough DN40CF

Product code: RD40-XXXX-YYYY

Continuous rotation, mounting flange DN40CF.

2'585.00 CHF

2'273.73 EUR *
2'568.82 USD *

Rotary Feedthrough DN40CF with precision scale

Product code: RD40SC

Magnetically driven continuous rotation, mounting flange DN40CF. Precision scale with 1 deg main scale and 0.1 deg vernier.
 

on request

480.00 CHF

422.20 EUR *
476.99 USD *

Drawer for flag style sample plates

Product code: RECOM(CB)

Receiver for SHOM flag style holders

Material: Beryllium copper CuBe2
REV: 31.03.2014 UM

995.00 CHF

875.19 EUR *
988.77 USD *

Drawer for flag style sample plates

Product code: RECOM(MO)

Receiver for SHOM flag style holders

Material:Molybdenum
REV: 31.03.2014 UM

470.00 CHF

413.40 EUR *
467.06 USD *

Side mount drawer for flag style sample plates

Product code: RECOM(SM2ST)

Receiver for SHOM flag style holders

• Two additional M2 threads for side mount
• Material: 1.4301 (AISI 304L)

REV 31.03.2014 UM

420.00 CHF

369.43 EUR *
417.37 USD *

Drawer for flag style sample plates

Product code: RECOM(ST)

Receiver for SHOM flag style holders

Material: Stainless Steel 1.4301
REV 31.03.2014 UM

520.00 CHF

457.38 EUR *
516.74 USD *

Drawer for flag style sample plates

Product code: RECOM(TI)

Receiver for SHOM flag style plates

Material: Titanium
REV: 31.03.2014 UM

on request

1'530.00 CHF

1'345.76 EUR *
1'520.42 USD *

2'150.20 CHF

1'891.28 EUR *
2'136.74 USD *

on request

1'950.00 CHF

1'715.19 EUR *
1'937.79 USD *

Receptacle for SHOM sample plates

Product code: RECOMHTR1001S

Sample receptor for SHOM plates. Fits directly on top of a HTR1001 Boralectric™ resistive heater.
Material: Molybdenum.
REV 09.05.2014 UM

on request

Receptacle with rear access for SHOM sample plates

Product code: RECOMRA

Receptacle with a central opening for optical access from the rear side.
 

1'382.00 CHF

1'215.59 EUR *
1'373.35 USD *

Stack of receptacles for 3x single and 2x double spaced slots for SHOM plates

Product code: RECOMSTACK(03H00S02H04S)

Sample storage stack for SHOM flag style sample plates. 3 single spaced and two double spaced slots.
Including straight (in-line) adapter for MD, RM40, GMD and WM type single shaft manipulators.
REV 24.11.2014 JK

1'382.00 CHF

1'215.59 EUR *
1'373.35 USD *

3x RECOMH00S and 2x RECOMH04S on Straight Adapter

Product code: RECOMSTACK(03H00S02H04S)H

Sample storage stack for SHOM flag style sample plates. 3 single-spaced and two double spaced slots.
Including straight (in-line) adapter for MD, RM40, GMD and WM type single shaft manipulators.

985.00 CHF

866.39 EUR *
978.83 USD *

4x RECOMH00S on Straight Adapter

Product code: RECOMSTACK(04H00S)

Sample storage stack for SHOM flag style sample plates. 4 single spaced slots.
Including straight (in-line) adapter for MD, RM40, GMD and WM type single shaft manipulators.

1'369.00 CHF

1'204.15 EUR *
1'360.43 USD *

Stack of 4 Receptacles sample storage with 2mm spacer on Straight Adapter

Product code: RECOMSTACK(04H02S)L

Sample storage stack for SHOM flag style sample plates. 4 single spaced slots.
Including straight (in-line) adapter for MD, RM40, GMD and WM type single shaft manipulators.

2'408.00 CHF

2'118.04 EUR *
2'392.92 USD *

10x RECOMH04S on Straight Adapter

Product code: RECOMSTACK(10H04S)

Sample storage stack for SHOM flag style sample plates. 3 single spaced and two double spaced slots.
Including straight (in-line) adapter for MD, RM40, GMD and WM type single shaft manipulators.
REV 24.11.2014 JK

on request

Customized Stack of receptacles for SHOM sample plates

Product code: RECOMSTACK(O|T)(XXHYYS)K

Stack of multiple receptacles for SHOM sample plates. Sample receptors can easily be mounted on top of each other to build a sample storage.

926.00 CHF

814.50 EUR *
920.20 USD *

3x labelled RECOMH00S on Orthogonal Adapter

Product code: RECOMSTACKO(03H00S)L

Sample storage stack for SHOM flag style sample plates with 3 single spaced, labelled slots.
Including orthogonal (perpendicular) adapter for MD, RM40, GMD and WM type single shaft manipulators.
REV 13.07.2015

1'480.00 CHF

1'301.79 EUR *
1'470.73 USD *

3x RECOMH04S and 2x RECOMH00S on Orthogonal Adapter

Product code: RECOMSTACKO(03H04S02H00S)

Sample storage stack for SHOM flag style sample plates. 3 single spaced and two double spaced slots.
Including orthogonal (perpendicular) adapter for MD, RM40, GMD and WM type single shaft manipulators.
REV 24.11.2014 JK

1'290.00 CHF

1'134.66 EUR *
1'281.92 USD *

5x RECOMH00S on Orthogonal Adapter

Product code: RECOMSTACKO(05H00S)

Sample storage stack for SHOM flag style sample plates with 5 single spaced slots.
Including orthogonal (perpendicular) adapter for MD, RM40, GMD and WM type single shaft manipulators.
REV 24.11.2014

4'680.00 CHF

4'116.46 EUR *
4'650.70 USD *

2'260.00 CHF

1'987.86 EUR *
2'245.85 USD *

Receptacle for SHOM on VG-Omniax E-beam heater

Product code: RECOMZEBH

Adapter to VG-Scienta's ZEBH E-beam heater for SHOM sample plates.

620.00 CHF

545.34 EUR *
616.12 USD *

3'800.00 CHF

3'342.42 EUR *
3'776.21 USD *

Customized Length Sample Transporter DN40CF

Product code: RM40-XXXX-YYYY

Magnetically driven single shaft sample transporter with mounting flange DN40CF. Re-engineered with superior slide bearing technology for long-lifetime and smooth operation.

2'900.00 CHF

2'550.80 EUR *
2'881.84 USD *

Sample Transporter DN40CF

Product code: RM40-0500-0030

Magnetically driven single shaft sample transporter with mounting flange DN40CF. Re-engineered with superior slide bearing technology for long-lifetime and smooth operation.

REV: 12.06.2014 UM

9'258.00 CHF

8'143.20 EUR *
9'200.04 USD *

Sample Transporter with Motorized Linear Drive

Product code: RM40-0500-0030-DRVRMOTL

Configuration example of a 1-axis motorized, magnetically driven single shaft sample transporter DN40CF with slide bearings.

3'100.00 CHF

2'726.71 EUR *
3'080.59 USD *

Sample Transporter DN40CF

Product code: RM40-0750-0030

Magnetically driven single shaft sample transporter with mounting flange DN40CF. Re-engineered with superior slide bearing technology for long-lifetime and smooth operation.

REV: 17.06.2014 UM

3'200.00 CHF

2'814.67 EUR *
3'179.97 USD *

Sample Transporter DN40CF

Product code: RM40-1000-0030

Magnetically driven single shaft sample transporter with mounting flange DN40CF. Re-engineered with superior slide bearing technology for long-lifetime and smooth operation.

REV: 17.06.2014 UM

3'400.00 CHF

2'990.59 EUR *
3'378.71 USD *

Sample Transporter DN40CF

Product code: RM40-1250-0030

Magnetically driven single shaft sample transporter with mounting flange DN40CF. Re-engineered with superior slide bearing technology for long-lifetime and smooth operation.

on request

Sample Transporter DN40CF with Handwheel Drive

Product code: RM40-DRVRM

Magnetically driven single shaft sample transporter equipped with manual linear drive with handwheel.

on request

Sample Transporter with Manipulation Extension

Product code: RM40-TSRMKG

Magnetically driven single shaft sample transporter with manipulation extension that enables the user to stand close to the system regardless of shaft extension/retraction.

6'250.00 CHF

5'497.41 EUR *
6'210.87 USD *

Dual Shaft Single Rotary Sample Transporter

Product code: RMD40-XXXX-YYYY

Precision magnetically driven dual shaft sample transporter with independent rotary motion of the inner shaft. Mounted pincer grips are oriented vertically.

4'980.00 CHF

4'380.33 EUR *
4'948.82 USD *

Dual Shaft Single Rotary Sample Transporter

Product code: RMD40-1250-0050_SPECIAL_OFFER

Special offer 20% discount, sales price CHF: 6'250.00
A fully refurbished, precision magnetically driven sample transporter with independent rotary motion of the inner shaft. Linear travel = 1250mm.
This offer is for 1 single item on stock. SN: 16-190

8'200.00 CHF

7'212.60 EUR *
8'148.66 USD *

Dual Shaft Sample Transporter with Pincer Grip

Product code: RMD40-PGRMS(OMH)

In the configuration shown here, the independent rotation of the inner shaft is used to open and close a clamping mechanism.

Standard length models:

• 300mm travel: RMD40-0300-0095-PGRMS(OMH)
• 500mm travel: RMD40-0500-0095-PGRMS(OMH)
• 750mm travel: RMD40-0750-0095-PGRMS(OMH)
• 1000mm travel: RMD40-1000-0095-PGRMS(OMH)

Order code customized length:

• RMD40-XXXX-YYYY-PGRMS(OMH)

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of pincer grip in millimeters (min. 90mm)

REV. 01.06.2011 UM, 29.08.2011 DvG

8'880.00 CHF

7'810.71 EUR *
8'824.41 USD *

6'250.00 CHF

5'497.41 EUR *
6'210.87 USD *

Dual Shaft Single Rotary Sample Transporter, for horizontal pincer orientation

Product code: RMD40(H)

Precision magnetically driven dual shaft sample transporter with independent rotary motion of the inner shaft.Mounted pincer grips are oriented horizontally (H).

8'200.00 CHF

7'212.60 EUR *
8'148.66 USD *

Dual Shaft Sample Transporter with Pincer Grip

Product code: RMD40(H)-PGRMS(OMH)

In the configuration shown here, the independent rotation of the inner shaft is used to open and close a clamping mechanism.

Standard length models:

• 300mm travel: RMD40-0300-0095-PGRMS(OMH)
• 500mm travel: RMD40-0500-0095-PGRMS(OMH)
• 750mm travel: RMD40-0750-0095-PGRMS(OMH)
• 1000mm travel: RMD40-1000-0095-PGRMS(OMH)

Order code customized length:

• RMD40-XXXX-YYYY-PGRMS(OMH)

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of pincer grip in millimeters (min. 90mm)

REV. 01.06.2011 UM, 29.08.2011 DvG

7'750.00 CHF

6'816.78 EUR *
7'701.48 USD *

9'700.00 CHF

8'531.97 EUR *
9'639.27 USD *

Dual Shaft Rotatable Sample Transporter with PGRMS

Product code: RMDG40-PGRMS(OMH)

Precision magnetically driven sample transporter with independent rotary motion of the inner as well as the outer shaft and pincer grip for Omicron-plates.

Standard length models:

• 300mm travel: RMDG40-0300-0095-PGRMS(OMH)
• 500mm travel: RMDG40-0500-0095-PGRMS(OMH)
• 750mm travel: RMDG40-0750-0095-PGRMS(OMH)
• 1000mm travel: RMDG40-1000-0095-PGRMS(OMH)

Order code customized length:

• RMDG40-XXXX-YYYY-PGRMS(OMH)

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of pincer grip in millimeters (min. 90mm)

REV: 01.06.2011 UM, 29.08.2011 DvG

on request

Dual Shaft Sample Transporter with Motorized Linear and Double Rotary Drive and PGRMS

Product code: RMDG40-XXXX-YYYY-DRVRMOTLRR-PGRMS(OMH)

Configuration example of a 2-axis motorized precision drive unit equipped, dual shaft rotatable sample transporter. Provides automatic and reproducible extension and independent rotation of the two shafts.

8'115.00 CHF

7'137.83 EUR *
8'064.20 USD *

10'065.00 CHF

8'853.02 EUR *
10'001.99 USD *

4'950.00 CHF

4'353.94 EUR *
4'919.01 USD *

Single Shaft Sample Transporter, non-rotatable

Product code: RMDS40-XXXX-YYYY

Precision magnetically driven single shaft linear sample transporter without rotary motion.

Standard length models:

• 300mm travel: RMDS40-300-50
• 500mm travel: RMDS40-500-50
• 750mm travel: RMDS40-750-50
• 1000mm travel: RMDS40-1000-50

Order code customized length:

• RMDS40-XXX-YYY

XXX: linear travel in millimeters
YYY: retracted length, flange face to end of shaft in millimeters (min. 40mm)

REV 1.6.2011 UM

on request

Sample Transporter DN40CF with Hollow Shaft

Product code: RMHS40-XXXX-YYYY

Magnetically driven, single hollow shaft sample transporter with mounting flange DN40CF.

on request

on request

4'680.00 CHF

4'116.46 EUR *
4'650.70 USD *

Dual Shaft Single Rotary Sample Transporter

Product code: RMJ40-XXXX-YYYY

Precision magnetically driven dual shaft sample transporter with independent rotary motion of the inner shaft. Re-engineered with main slide bearings for extra durability and smooth operation. Mounted pincer grips are oriented vertically.

4'680.00 CHF

4'116.46 EUR *
4'650.70 USD *

Dual Shaft Single Rotary Sample Transporter, for horizontal pincer orientation

Product code: RMJ40(H)-XXXX-YYYY

Precision magnetically driven dual shaft sample transporter with independent rotary motion of the inner shaft. Re-engineered with main slide bearings for extra durability and smooth operation. Mounted pincer grips are oriented horizontally (H).

5'328.00 CHF

4'686.43 EUR *
5'294.64 USD *

Dual Shaft Rotatable Sample Transporter with Slide Bearings DN40CF

Product code: RMJG40-XXXX-YYYY

Magnetically driven sample transporter with independent rotary motion of the inner as well as the outer shaft. Slide bearings for linear motion throughout guarantee for long-lifetime and smooth operation even after numerous bakeout cycles.

7'278.00 CHF

6'401.62 EUR *
7'232.44 USD *

Dual Shaft Rotatable Sample Transporter with Slide Bearings, with PGRMS

Product code: RMJG40-PGRMS(OMH)-XXXX-YYYY

Magnetically driven sample transporter with independent rotary motion of the inner as well as the outer shaft and pincer grip for SHOM flag style sample plates. Slide bearings for linear motion throughout guarantee for long-lifetime and smooth operation even after numerous bakeout cycles.

• XXXX: linear travel in millimeters
• YYYY: retracted length, flange face to tip of pincer grip (min. 90mm)

1'250.00 CHF

1'099.48 EUR *
1'242.17 USD *

Revolving Sample Carrier for Block Style Holders

Product code: RSC2BS

For two block style sample holders 12x5x19.5mm. Fits to KS load locks and all MD and GMD sample transporters.
 

1'650.00 CHF

1'451.31 EUR *
1'639.67 USD *

Revolving Sample Carrier for SHOM sample plates

Product code: RSC2OM

For two SHOM sample plates. Fits to KS load locks and all MD and GMD sample transporters.
REV 28.3.2011 UM

1'250.00 CHF

1'099.48 EUR *
1'242.17 USD *

Revolving Sample Carrier for small Block Style Holders

Product code: RSC4BSK

For four SHBSK small block style sample holders 19.5x5x5mm. Fits to KS load locks and all MD and GMD sample transporters. REV 28.3.2011 UM

2'145.00 CHF

1'886.71 EUR *
2'131.57 USD *

1'965.00 CHF

1'728.38 EUR *
1'952.70 USD *

Revolving Sample Carrier for SHOM sample plates

Product code: RSCL3OM

For three SHOM sample plates. Fits to all MD and GMD sample transporters.
REV 21.2.2011 UM

1'650.00 CHF

1'451.31 EUR *
1'639.67 USD *

Revolving Sample Carrier for Block Style Holders

Product code: RSCL4BS

For 4x block style sample holders 12x5x19.5mm.

Fits to all MD and GMD sample transporters.

REV 31.03.2014 UM

2'710.00 CHF

2'383.67 EUR *
2'693.03 USD *

76.00 CHF

66.85 EUR *
75.52 USD *

Storage Box suitable for EXSICA3S

Product code: SBEXSICAS

Storage box for Sample Plates. The box is made of Polystyrene(PS). The Storage box is suitable for the EXSICA3S.
Outline dimensions: 330 x 50 x 220mm (W x H x D)
Subdivision: 6
1 piece 215 x 108 x 45mm (W x D x H) | 2 piece 162 x 108 x 45mm | 1 piece 108 x 54 x 45mm | 2 piece 54 x 54 x 45mm

320.00 CHF

281.47 EUR *
318.00 USD *

Factory overhaul of MD40 linear/rotary feedthroughs

Product code: SERFMD40

Factory overhaul of MD40 linear/rotary feedthrough

498.00 CHF

438.03 EUR *
494.88 USD *

Factory overhaul of WMG40 Wobblestick

Product code: SERFWMG40

Complete factory overhaul of dual shaft wobblestick manipulator including

• disassembly and ultrasonic cleaning
• slide bearing replacement, air- and vacuumside
• functional inspection

598.00 CHF

525.99 EUR *
594.26 USD *

Factory change of retracted length for WMG40 Wobblestick

Product code: SERFWMG40DY-XXXX-YYYY-ZZZZ

Factory overhaul of dual shaft wobblestick manipulator including

• disassembly and ultrasonic cleaning
• replacement inner shafts to new custom retracted length
• functional inspection

270.00 CHF

237.49 EUR *
268.31 USD *

Bearings for MD40 linear/rotary feedthroughs

Product code: SERKMD40

Replacement kit for bearings of MD40 linear/rotary feedthroughs

260.00 CHF

228.69 EUR *
258.37 USD *

Service Kit for WM40 with a 7mm shaft

Product code: SERKWM40

Replacement kit for bearings of WM40-manipulators with a 7mm shaft.
REV: 24.5.2011 UM

260.00 CHF

228.69 EUR *
258.37 USD *

Service Kit for WM40 with a 5mm shaft

Product code: SERKWM40(S5)

Replacement kit for bearings of WM40-manipulators with a 5mm shaft
REV: 24.5.2011 UM

0.00 CHF

0.00 EUR *
0.00 USD *

475.00 CHF

417.80 EUR *
472.03 USD *

Sample Holder 19.5x12x5mm with 4x M1.6 threads

Product code: SHBS(4M16ST)

Block style holder with four M1.6 screws for sample mounting.

Material: Stainless Steel 1.4301 (AISI 304L)

REV: 31.03.2014 UM

1'960.00 CHF

1'723.99 EUR *
1'947.73 USD *

Sample Carrier with Heater and Crucible

Product code: SHBSCS

Sample holder with integrated resistive heater and crucible for temperatures up to 800°C

Miniaturized, in-situ exchangable evaporator for organic materials

REV 31.03.2014 UM

on request

Tantalum Sample Holder for direct current heating

Product code: SHBSDC(TA)

Split tantalum sample holder with AlN isolaor

on request

Sampleholder Hybride Block style and SHOM

Product code: SHBSOMHM

Compatible with SHBS block style as well as SHOM systems. Materials: Molybdenum, CuBe, Titanium. This particular model has a central gap for applying magnetic field using a horseshoe magnet.

190.00 CHF

167.12 EUR *
188.81 USD *

Flag style sample plate

Product code: SHOM(AL2O3)

Flag style sample holder
Material: AL2O3
 

138.00 CHF

121.38 EUR *
137.14 USD *

Flag style sample plate

Product code: SHOM(CB)

Flag style sample holder
Material: beryllium copper CuBe2

67.00 CHF

58.93 EUR *
66.58 USD *

Flag style sample plate Cu-OFE

Product code: SHOM(CU)

Flag style sample plate
Material: Cu-OFE (EN CW009A)

91.00 CHF

80.04 EUR *
90.43 USD *

Flag style sample plate

Product code: SHOM(MO)

Flag style sample plate, base model
Material: Molybdenum
 

27.00 CHF

23.75 EUR *
26.83 USD *

Flag style sample plate

Product code: SHOM(ST)

Flag style sample plate, base model
Material: stainless steel 1.4301 (AISI 304L)
 

210.00 CHF

184.71 EUR *
208.69 USD *

Flag style sample plate

Product code: SHOM(TA)

Flag style sample plate
Material: Tantalum
 

96.00 CHF

84.44 EUR *
95.40 USD *

Flag style sample plate

Product code: SHOM(TI)

Flag style sample holder
Material: Titanium

on request

396.00 CHF

348.32 EUR *
393.52 USD *

Flag style sample plate, 3xM1.4, leaf springs / molybdaenum

Product code: SHOM3T(MO)

Flag style sample plate, 3x M1.4, incl. cheesehead screws and leaf springs
 

185.00 CHF

162.72 EUR *
183.84 USD *

Flag Style Sample Plate, 3xM1.4, Leaf Springs

Product code: SHOM3T(ST)

Flag style sample plate, three threads M1.4, incl. cheesehead screws and leaf springs
Material: stainless steel 1.4301 (AISI 304L)
REV 11.04.2014 UM

497.00 CHF

437.15 EUR *
493.89 USD *

Flag style sample plate, 4xM1.4, leaf springs

Product code: SHOM4T(MO)

Commonly used flag style sample holder with 4x M1.4 screws and leaf springs for clamping the sample.

on request

on request

1'281.00 CHF

1'126.75 EUR *
1'272.98 USD *

1'298.00 CHF

1'141.70 EUR *
1'289.87 USD *

1'530.00 CHF

1'345.76 EUR *
1'520.42 USD *

2'226.00 CHF

1'957.96 EUR *
2'212.06 USD *

Sample Holder 13 Electrical Contacts Molybdenum including temperature sensor

Product code: SHOMEC13(MO-DT)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. With pre-installed lake shore DT-670 silicone diode temperature sensor. Requires RECOMEC13(LT) sample receptor assembly.

Material: Molybdenum, Shapal M      -       REV 23.05.2014 UM

1'526.00 CHF

1'342.25 EUR *
1'516.45 USD *

1'285.00 CHF

1'130.27 EUR *
1'276.96 USD *

on request

Flag Style Sample Plate, 5xM1.4 / molybdenum

Product code: SHOMT(MO)

Commonly used flag style sample holder with 5x M1.4 screwsholes.

649.35 CHF

571.16 EUR *
645.28 USD *

585.00 CHF

514.56 EUR *
581.34 USD *

on request

Straight through flag style sample plate

Product code: SHOS

Straight flag style holder SHOS, available in a variety of materials and customized versions.

683.00 CHF

600.76 EUR *
678.72 USD *

Sample Holder for 1 Inch Wafers

Product code: SHUPSCH

Flag style sample plate for wafers with 1 inch diameter.
With central opening for optical access from the rear side.

438.00 CHF

385.26 EUR *
435.26 USD *

VG-stub sampleholder with with screwcap, 15mm OD

Product code: SHVGSTUBSCD15

Sampleholder for VG Microlab and older VG ESCA-labs.
Material: Stainless steel 1.4435 (316L) 15mm OD screwcap, thread M14x0.5

65.00 CHF

57.17 EUR *
64.59 USD *

Thermocouple Feedthrough CF40 Type E for 3 Pairs, 1 item surplus sale

Product code: TCF40E3_SPECIAL_OFFER

Thermocouple feedthrough CF40 Type E for 3 pairs and airside connector
ON STOCK: 1 piece, delivery within 1 week
20.7.2017 JK, WR(G6)

A-14-037

795.00 CHF

699.27 EUR *
790.02 USD *

Desktop Temperature Controller 16A, K type TC input

Product code: TMHT31

HT31 PD Temperature controller with electronic power regulation.

Nominal output power can be adjusted between 100 % to 0 according to individual power requirements.

The set-point of the temperature regulator can be digitally adjusted into increments of 1 °C.

9.50 CHF

8.36 EUR *
9.44 USD *

Combi Wrench Size 10mm for metric M6

Product code: TOCOWR10

Combination spanner size 10mm for M6 hexagonal head screws and hex nuts. Fits to metric bolt sets for DN40CF (2.75") flanges.

11.50 CHF

10.12 EUR *
11.43 USD *

Combi Wrench Size 13mm for metric M8

Product code: TOCOWR13

Combination spanner size 13mm for M8 hexagonal head screws and hex nuts. Fits to metric bolt sets for flange sizes from DN63CF (4.5") up to DN250CF (12").

8.00 CHF

7.04 EUR *
7.95 USD *

Combi Wrench Size 7mm for metric M4

Product code: TOCOWR7

Combination spanner size 7mm for M4 hexagonal head screws and hex nuts. Fits to metric bolt sets for DN16CF (1.33") flanges

300.00 CHF

263.88 EUR *
298.12 USD *

Tube Support for MD40 and MD16-ADCF16TS

Product code: TSMD-XXXX

Tube Support for MD40 and MD16-ADCF16TS.
Two parallel 8mm diameter shafts are protecting the tube unit against accidental bending.

250.00 CHF

219.90 EUR *
248.43 USD *

Tube Support for MD40 and MD16-ADCF16TS single sided

Product code: TSMDH-XXXX

Single sided tube support for MD16(TS) and MD40.
One 8mm diameter shaft protects the tube unit from accidental bending.

425.00 CHF

373.82 EUR *
422.34 USD *

Guide Rail for RM and GMD Sample Transporters

Product code: TSRM-XXXX

Guide Rail with OD 8mm for RM Sample Transporters

562.00 CHF

494.33 EUR *
558.48 USD *

Tube support with pivot mounted shafts OD 10mm

Product code: TSRMB-XXXX

Two 10mm OD bars, support and protect the sample transporter.

on request

1'025.00 CHF

901.57 EUR *
1'018.58 USD *

Tube support with pivot mounted shafts OD 16mm

Product code: TSRMBS-XXXX

Two 16mm OD shafts support and protect the sample transporter.

1'610.00 CHF

1'416.13 EUR *
1'599.92 USD *

Extension shaft for remote manipulation

Product code: TSRMKG-XXXX

Manipulation extension for sample transporters. Enables the user to stand close to the system regardless of shaft extension/retraction.

198.00 CHF

174.16 EUR *
196.76 USD *

1'359.70 CHF

1'195.97 EUR *
1'351.19 USD *

Support Rail for UHV Suitcase

Product code: TSVSN-XXXX

Alignment and Protection Rail for Linear/Rotary Feedthrough on NexGeneration UHV Suitcase VSN40S(V)

250.00 CHF

219.90 EUR *
248.43 USD *

Parking-/ Protection Rail for Wobblesticks DN40CF

Product code: TSWM-XXXX

External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: straddled
REV. 24.5.2011 UM

850.00 CHF

747.65 EUR *
844.68 USD *

Aligner for Wobblesticks DN40CF

Product code: TSWMA

A useful accessory to align and keep the deflection angle of a wobblestick manipulator. Three thumbscrews are used to position the wobblestick axis.

Maximum deflection angle = +-8 degrees.
 

850.00 CHF

747.65 EUR *
844.68 USD *

Deflection Limiter (3deg) for Wobblesticks DN40CF

Product code: TSWMDL(3)

Deflection Limiter to restrict the angular deflection of wobblesticks to three degrees.

395.00 CHF

347.44 EUR *
392.53 USD *

Protection Rail for Wobblesticks DN40CF - also for non-horizontal usage

Product code: TSWMF-XXXX

External support rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use - also in non-horizontal usage.
Please note: only for WM or WMG(FC)
REV. 25.03.2013 DvG

290.00 CHF

255.08 EUR *
288.18 USD *

Inline Parking-/ Protection Rail for WM DN40CF

Product code: TSWMIL-XXXX

External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: inline
REV. 24.5.2011 UM

345.00 CHF

303.46 EUR *
342.84 USD *

Lock Ring for TSWM DN40CF

Product code: TSWMLR

Lock ring for locking the external support rails TSWM with three or four knurled screws.
REV. 25.03.2013 DvG

395.00 CHF

347.44 EUR *
392.53 USD *

Parking-/ Protection Rail for WM DN40CF vertical

Product code: TSWMV-XXXX

External support and parking rail for vertically mounted wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
REV. 02.04.2013 DvG

on request

UHV System design

Product code: UHV-SD

We build customer designed UHV-Systems. Our engineers design in full 3D using CATIA, one of the most advanced CAD-systems. We plan, design and build fully equipped systems including all pumping, control and bakeout acessories

215.00 CHF

189.11 EUR *
213.65 USD *

215.00 CHF

189.11 EUR *
213.65 USD *

450.00 CHF

395.81 EUR *
447.18 USD *

Upgrade to 200°C Bakeable Version of RMDG Dual Shaft (Double Rotary) Sample Transporters

Product code: UPGRADEHB_MKRMDG

Upgrade from 150°C to 200°C bakeout temperature for RMDG40 & RMDG40(RS) dual shaft rotary sample transporters with independant rotary motion of the inner as well as the outer shaft.

450.00 CHF

395.81 EUR *
447.18 USD *

Upgrade to 200°C Bakeable Version of RMJG Dual Shaft (Double Rotary) Sample Transporters

Product code: UPGRADEHB_MKRMJG

Upgrade from 150°C to 200°C bakeout temperature for RMJG dual shaft rotary sample transporters with independant rotary motion of the inner as well as the outer shaft.

215.00 CHF

189.11 EUR *
213.65 USD *

Upgrade to 200°C Bakeable Version of Single Shaft Wobblesticks and Single L/R Feedthroughs

Product code: UPGRADEHB_MKS

Upgrade from 150°C to 200°C Bakeout Temperature for Single Shaft Wobblesticks and L/R Feedthroughs.

320.00 CHF

281.47 EUR *
318.00 USD *

Upgrade to 200°C Bakeable Version of Single Shaft Wobblesticks and Single L/R Feedthroughs High Torque

Product code: UPGRADEHB_MKSHT

Upgrade from 150°C to 200°C Bakeout Temperature for Single Shaft Wobblesticks and L/R Feedthroughs High Torque Version.

215.00 CHF

189.11 EUR *
213.65 USD *

Upgrade to 200°C Bakeable Version of Dual Shaft Wobblesticks and Dual L/R Feedthroughs

Product code: UPGRADEHB_MKWMG(FC)

Upgrade from 150°C to 200°C Bakeout Temperature for Dual Shaft Wobblesticks and Dual L/R Feedthroughs.

500.00 CHF

439.79 EUR *
496.87 USD *

Custom programming of pressure calibration

Product code: UPGRADELSA3.0(+PROGX)

reprogrammig of the temperature current curve

266.00 CHF

233.97 EUR *
264.33 USD *

on request

Base flange upgrade for MXY Boomerax from CF63T to CF100T

Product code: UPGRADEMXY(BASECF100T)

on request

Base flange upgrade for MXY Boomerax from CF100T to CF160T

Product code: UPGRADEMXY(BASECF160T)

on request

Travel flange upgrade for MXY Boomerax from CF63T to CF100T

Product code: UPGRADEMXY(TRAVELCF100T)

on request

Travel flange upgrade for MXY Boomerax from CF40T to CF63T

Product code: UPGRADEMXY(TRAVELCF63T)

on request

Motorization upgrade for MXY Boomerax Stage NW100, DC

Product code: UPGRADEMXY100(+MOTMXYN23DC)

Motorization Kit for one axis of Boomerax-Series XY Manipulators. DC Motor 36V.

on request

Linear Absolute Optical Encoder Kit for X-Translator, 50mm Scale

Product code: UPGRADEMXY100(+MXENCLAK50)

Absolute, optical linear encoder with 78nm resolution. Stainless steel scale.

on request

Limit Switch Kit for Boomerax XY Stage, one axis

Product code: UPGRADEMXY100(+MXLIMELKIT)

One axis electrical limit switches for Boomerax XY Manipulators. Positions adjustable. Fully bakeable to 150°C

on request

Load compensation upgrade for Boomerax XY Stage NW100, one axis

Product code: UPGRADEMXY100(+MXYFS74)

Constant force spring with 74N load relief for one axis of Boomerax stage NW100.

on request

Limit Switch Kit for Boomerax XY Stage, one axis

Product code: UPGRADEMXY40(+MXLIMELKIT)

One axis electrical limit switches for Boomerax XY Manipulators. Positions adjustable. Fully bakeable to 150°C

on request

Load relief upgrade for Boomerax XY Stage NW40, one axis

Product code: UPGRADEMXY40(+MXYFS22)

Constant force spring with 22N load relief for one axis of Boomerax stage NW40.

on request

Base flange upgrade for MXY40 Boomerax from CF40T to CF40

Product code: UPGRADEMXY40(BASECF40)

on request

Base flange upgrade for MXY40 Boomerax from CF40T to CF63

Product code: UPGRADEMXY40(BASECF63)

on request

Base flange upgrade for MXY40 Boomerax from CF40T to CF63T

Product code: UPGRADEMXY40(BASECF63T)

on request

Limit Switch Kit for Boomerax XY Stage, one axis

Product code: UPGRADEMXY63(+MXLIMELKIT)

One axis electrical limit switches for Boomerax XY Manipulators. Positions adjustable. Fully bakeable to 150°C

on request

Linear Absolute Optical Encoder Kit for Z-Translator, 100mm Scale

Product code: UPGRADEMZ(+MZENCLAK100)

Absolute, optical linear encoder. Stainless steel scale.

on request

Linear Absolute Optical Encoder Kit for Z-Translator, 300mm Scale

Product code: UPGRADEMZ(+MZENCLAK300)

Absolute, optical linear encoder. Stainless steel scale.

on request

Linear Absolute Optical Encoder Kit for Z-Translator, 100mm Scale

Product code: UPGRADEMZ40(+MZENCLAK100)

Absolute, optical linear encoder. Stainless steel scale.

on request

Linear Absolute Optical Encoder Kit for Z-Translator, 200mm Scale

Product code: UPGRADEMZ40(+MZENCLAK200)

Absolute, optical linear encoder. Stainless steel scale.

on request

Cable Carrier for Boomerax Z-Stage

Product code: UPGRADEMZ63(+MZECH)-XXXX

695.00 CHF

611.31 EUR *
690.65 USD *

Upgrade for Sample Transporters to CF50

Product code: UPGRADETU50-XXXX

Tube assembly upgrade for Sample Transporters to DN50CF
 

1'085.00 CHF

954.35 EUR *
1'078.21 USD *

Upgrade to 200 l/s nominal pumping speed for VSN40S

Product code: UPGRADEVSN40S(+D200)

Upgrade to NexTorr D-200-5 with 200 l/s nominal pumping speed

795.00 CHF

699.27 EUR *
790.02 USD *

Upgrade RV Rear View for VSN40S

Product code: UPGRADEVSN40S(+RV)

Welded Viewport for view inside the chamber from the rear side.

436.00 CHF

383.50 EUR *
433.27 USD *

Additional 2xDN16CFT Service Ports for VSN40S

Product code: UPGRADEVSN40S(+SP2X16)

Two additional DN16CFT service ports for vacuum gauge, electrical feedthrough, etc.

313.00 CHF

275.31 EUR *
311.04 USD *

Additional DN40CFT Service Port for VSN40S

Product code: UPGRADEVSN40S(+SP40)

Additional DN40CFT service port for vacuum gauge, electrical feedthrough, etc.

695.00 CHF

611.31 EUR *
690.65 USD *

Ultra-Compact DN40CF Cross

Product code: VSCROSS40RL80

Ultra compact DN40CF cross used as buffer volume between a UHV-system and a vacuum suitcase. Insert length 80mm, with a port for pumpdown using a turbo pump and an additional CF40 for an vacuum gauge.

on request

Fast Pump Down Dock with LN2 Dewar UHV Booster CF40

Product code: VSCTDH40

Fast pumpdown dock for UHV Suitcase. A turbo pumped, compact docking chamber is equipped with a dewar version LN2 cold trap with heating coil and temperature sensor.
A working pressure in the 1E-8mbar range can be reached within much less than 1 hour.

on request

Fast Pump Down Dock with LN2 UHV Booster CF40

Product code: VSCTH40(WT)

Fast pumpdown dock for UHV Suitcase. A turbo pumped, compact docking chamber is equipped with a flow through version LN2 cold trap with heating coil and temperature sensor.
A working pressure in the 1E-8mbar range can be reached within much less than 1 hour.

18'932.00 CHF

16'652.30 EUR *
18'813.48 USD *

23'793.00 CHF

20'927.96 EUR *
23'644.04 USD *

24'436.00 CHF

21'493.54 EUR *
24'283.02 USD *

1'480.00 CHF

1'301.79 EUR *
1'470.73 USD *

Flightcase for Mini NexGeneration UHV Suitcase

Product code: VSN40MFLIGHTCASE4-XXXX

Professional transport case for NexGeneration UHV Suitcase.

19'926.00 CHF

17'526.61 EUR *
19'801.25 USD *

Base Module NexGeneration UHV Suitcase S

Product code: VSN40S

The NexGeneration UHV Suitcase is an ultra compact, lightweight and modularly adaptable system to keep and carry your samples under true ultra-high vacuum conditions. It is delivered under vacuum, fully baked and ready to use.

The VSN40 is available in a variety of configurations, with various options and upgrades. Please get in touch with us to discuss your preferred combination.

28'815.00 CHF

25'345.24 EUR *
28'634.60 USD *

32'553.00 CHF

28'633.13 EUR *
32'349.20 USD *

on request

LN2-cooled UHV Suitcase Configuration UHVCTM Ultra High Vacuum Cryo Transfer Module

Product code: VSN40S(VTOPCF50SP2x16)-0350-WM40-TSWMVSNV-CTD50SHIELDS-TMPSHIELDCF16

UHVCTM Ultra High Vacuum Cryo Transfer Module

This example of a cryo version of a NexGeneration UHV suitcase is intended for the transport of sensitive cryo cooled samples without interrupting the cold chain or breaking the vacuum.

Special Features:

• DN50CF top flange and dewar for liquid nitrogen (LN₂)
• Cryo shields inside the suitcase chamber protect the sample from warm surroundings
• Active cooling of the sample via cooling block inside the shields
• Temperature sensor mounted on shields
• 2 additional service ports

2'197.00 CHF

1'932.45 EUR *
2'183.25 USD *

Bake out tent and heater module for UHV Suitcase

Product code: VSN40SBTHE-XXXX

Bake out tent for NexGeneration UHV suitcase, including heater module.

1'580.00 CHF

1'389.74 EUR *
1'570.11 USD *

Flightcase for NexGeneration UHV Suitcase with Support Rail

Product code: VSN40SFLIGHTCASE4-XXXX-YYYY

Professional transport case for NexGeneration UHV Suitcase.

1'580.00 CHF

1'389.74 EUR *
1'570.11 USD *

Flightcase for NexGeneration UHV Suitcase without Support Rail

Product code: VSN40SFLIGHTCASE4RM-XXXX-YYYY

Professional transport case for NexGeneration UHV Suitcase.

400.00 CHF

351.83 EUR *
397.50 USD *

Compact DN40CF T-piece

Product code: VSTEE40

Compact DN40CF T-piece used as buffer volume on sample interchange systems. Length: 90mm

3'500.00 CHF

3'078.55 EUR *
3'478.09 USD *

Customized Length Single Shaft Wobblestick DN40CF

Product code: WM40-XXXX-YYYY

Magnetically driven single shaft wobblestick with mounting flange DN40CF.

XXXX: linear travel in mm / YYYY: retracted shaft length in mm (min. 42) REV 26.04.2014UM

3'000.00 CHF

2'638.75 EUR *
2'981.22 USD *

Single Shaft Wobblestick DN40CF

Product code: WM40-0100-0060

Magnetically driven single shaft wobblestick with mounting flange DN40CF. Linear travel: 100mm, continuous rotation. Typical lead time: 1-2 weeks. REV 24.06.2014 UM.

3'150.00 CHF

2'770.69 EUR *
3'130.28 USD *

Single Shaft Wobblestick DN40CF

Product code: WM40-0150-0060

Magnetically driven single shaft wobblestick with mounting flange DN40CF. Linear travel: 150mm, continuous rotation. Typical lead time: 1-2 weeks. REV 24.06.2014 UM.

3'300.00 CHF

2'902.63 EUR *
3'279.34 USD *

Single Shaft Wobblestick DN40CF

Product code: WM40-0200-0060

Magnetically driven single shaft wobblestick with mounting flange DN40CF. Linear travel: 200mm, continuous rotation. Typical lead time: 1-2 weeks. REV 24.06.2014 UM.

4'020.00 CHF

3'535.93 EUR *
3'994.83 USD *

Customized Length High Torque Single Shaft Wobblestick DN40CF

Product code: WM40HT-XXXX-YYYY

High power magnetically driven single shaft wobblestick with mounting flange DN40CF.

XXXX: linear travel in mm / YYYY: retracted shaft length in mm (min. 42) REV 13.11.2014 JK

3'520.00 CHF

3'096.14 EUR *
3'497.96 USD *

High Torque Single Shaft Wobblestick DN40CF

Product code: WM40HT-0100-0060

High power magnetically driven single shaft wobblestick with mounting flange DN40CF. Linear travel: 100mm, continuous rotation. Typical lead time: 1-2 weeks. REV 12.11.2014 JK

3'670.00 CHF

3'228.08 EUR *
3'647.02 USD *

High Torque Single Shaft Wobblestick DN40CF

Product code: WM40HT-0150-0060

High power magnetically driven single shaft wobblestick with mounting flange DN40CF. Linear travel: 150mm, continuous rotation. Typical lead time: 1-2 weeks. REV 12.11.2014 JK

5'090.00 CHF

4'477.09 EUR *
5'058.13 USD *

Customized Length Dual Shaft Wobblestick DN40CF

Product code: WMG40-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with mounting flange DN40CF.

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 63mm), REV 26.08.2014 UM

4'490.00 CHF

3'949.34 EUR *
4'461.89 USD *

Dual Shaft Wobblestick DN40CF

Product code: WMG40-0100-0063

Magnetically driven dual shaft wobblestick with mounting flange DN40CF. Linear travel: 100mm, continuous rotation. Typical lead time: 1-2 weeks. REV 25.08.2014 JK.

4'540.00 CHF

3'993.32 EUR *
4'511.58 USD *

Dual Shaft Wobblestick DN40CF

Product code: WMG40-0150-0063

Magnetically driven dual shaft wobblestick with mounting flange DN40CF. Linear travel: 150mm, continuous rotation. Typical lead time: 1-2 weeks. REV 25.08.2014 JK.

4'590.00 CHF

4'037.29 EUR *
4'561.26 USD *

Dual Shaft Wobblestick DN40CF

Product code: WMG40-0200-0063

Magnetically driven dual shaft wobblestick with mounting flange DN40CF. Linear travel: 200mm, continuous rotation. Typical lead time: 1-2 weeks. REV 25.08.2014 JK.

4'640.00 CHF

4'081.27 EUR *
4'610.95 USD *

Dual Shaft Wobblestick DN40CF

Product code: WMG40-0250-0063

Magnetically driven dual shaft wobblestick with mounting flange DN40CF. Linear travel: 250mm, continuous rotation. Typical lead time: 1-2 weeks. REV 25.08.2014 JK.

4'690.00 CHF

4'125.25 EUR *
4'660.64 USD *

Dual Shaft Wobblestick DN40CF

Product code: WMG40-0300-0063

Magnetically driven dual shaft wobblestick with mounting flange DN40CF. Linear travel: 300mm, continuous rotation. Typical lead time: 1-2 weeks. REV 25.08.2014 JK.

5'465.00 CHF

4'806.93 EUR *
5'430.79 USD *

5'265.00 CHF

4'631.01 EUR *
5'232.04 USD *

5'265.00 CHF

4'631.01 EUR *
5'232.04 USD *

7'405.00 CHF

6'513.33 EUR *
7'358.64 USD *

6'770.00 CHF

5'954.79 EUR *
6'727.62 USD *

5'390.00 CHF

4'740.96 EUR *
5'356.26 USD *

High Precision Actuator Dual Shaft Wobblestick DN40CF

Product code: WMG40(FC)-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with fine adjuster magnetic coupling.

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 63mm), REV: 08.09.2014 JK

8'380.00 CHF

7'370.92 EUR *
8'327.54 USD *

9'340.00 CHF

8'215.32 EUR *
9'281.53 USD *

on request

Only Rotatable Actuator Dual Shaft WS DN40CF

Product code: WMG40(RT)-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with mounting flange DN40CF.
For rotary motion between the two invacuum shafts.

Order code standard length:

• 100mm travel: WMG40(RT)-100-63
• 150mm travel: WMG40(RT)-150-63
• 200mm travel: WMG40(RT)-200-63
• 250mm travel: WMG40(RT)-250-63
• 300mm travel: WMG40(RT)-300-63

Order code customized version:

• WMG40(RT)-XXXX-YYYY

XXXX: linear travel in millimeters (min. 50mm)
YYYY: retracted length, flange face to end of shaft in millimeters (min. 63mm)

5'690.00 CHF

5'004.84 EUR *
5'654.38 USD *

Dual Shaft Wobblestick Wide Angle DN40CF

Product code: WMGWA40-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with mounting flange DN40CF.
WMGWA40 models feature an extra wide angular range of +/-28°.

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 77mm), REV: 08.09.2014 JK

7'985.00 CHF

7'023.48 EUR *
7'935.01 USD *

7'120.00 CHF

6'262.64 EUR *
7'075.42 USD *

5'990.00 CHF

5'268.71 EUR *
5'952.50 USD *

High Precision Actuator Dual Shaft Wobblestick Wide Angle DN40CF

Product code: WMGWA40(FC)-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with fine adjuster magnetic coupling.
WMGWA40 models feature an extra wide angular range of +/-28°.

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 77mm), REV: 09.09.2014 JK

4'150.00 CHF

3'650.28 EUR *
4'124.02 USD *

Wide Angle Single Shaft Wobblestick DN40CF

Product code: WMWA40-XXXX-YYYY

Wide angle magnetically driven single shaft wobblestick manipulator with mounting flange DN40CF. Extra wide angular range of +/-28°.

XXXX: linear travel in mm / YYYY: retracted shaft length in mm (min. 50) REV 26.04.2014 UM

380.00 CHF

334.24 EUR *
377.62 USD *

Zero Lenght Reducer DN100CF to DN40CF

Product code: ZLCF100CF40WM

Zero Length Reducing Flange CF100/CF40 with bevelled inner edges. Customized for use with wobblesticks.

230.00 CHF

202.30 EUR *
228.56 USD *

Zero Length Reducing Flange CF63CF40 for Wobblesticks

Product code: ZLCF63CF40WM

Zero Length Reducing Flange CF63/CF40 with bevelled inner edges. Customized for use with wobblesticks.